Common mode impedance
The resistance the choke presents to common mode noise, quoted at a stated frequency. Compare candidates at the same frequency or the values do not correspond.
Produits d’inductance
Power Line Common Mode Chokes
A common mode choke blocks noise that travels the same direction on both conductors while letting the supply current pass. Start from the frequency band your measurement actually fails, pick the impedance that covers it, then check rated current and DC resistance against the load the line has to carry.
Recherche et sélection de références
Trouver des références pour Power Line Common Mode Chokes
Le tableau utilise les fiches produits actuelles du site anglophone, les critères de sélection publiés et les liens vers les fichiers techniques propres à chaque référence.
* Colonnes Image et Référence figées · faites glisser horizontalement pour consulter toutes les caractéristiques
| Image | Fiche technique | Comparer | Téléchargements |
Dimensions (L×l×H max.)
|
Z (Ω) à 100 MHz/0,1 V, min.
|
Z (Ω) à 100 MHz/0,1 V, réf.
|
Résistance DC (mΩ), max.
|
Courant nominal DC (A), max.
|
Résistance d’isolement (MΩ), min.
|
Tension nominale (V), max.
|
Échantillon |
|---|
| Image | Référence | Fiche technique | Comparer | Téléchargements | Dimensions (L×l×H max.) | Z (Ω) à 100 MHz/0,1 V, min. | Z (Ω) à 100 MHz/0,1 V, réf. | Résistance DC (mΩ), max. | Courant nominal DC (A), max. | Résistance d’isolement (MΩ), min. | Tension nominale (V), max. | Échantillon |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
WHACM15A60R152 | SPEC | 1513 | 1200 | 1500 | 23 | 5 | 10 | 80 |
|
||
|
|
WHACM15A60R102 | SPEC | 1513 | 800 | 1000 | 10 | 9 | 10 | 80 |
|
||
|
|
WHACM15A60R701 | SPEC | 1513 | 500 | 700 | 7 | 10 | 10 | 80 |
|
||
|
|
WHACM15A60R501 | SPEC | 1513 | 400 | 500 | 6 | 10 | 10 | 80 |
|
||
|
|
WHACM15A60R301 | SPEC | 1513 | 225 | 300 | 5 | 13 | 10 | 80 |
|
Aucune référence correspondante
Élargissez les filtres sélectionnés ou effacez la recherche en cours.
By series
Power line common mode choke families
Families differ in construction and size band, which sets impedance and current together.
01Série WHAL1211ARéférences : 7
02Série WHPL1211ARéférences : 7
03Série WHAL1513ARéférences : 5
04Série WHAL4520ARéférences : 14
05Série WHAL7060ARéférences : 9
06Série WHAL9070ARéférences : 6
07Série WHACM07A40RRéférences : 9
08Série WHACM09A50RRéférences : 6
09Série WHACM12A65RRéférences : 7
10Série WHACM15A60RRéférences : 5
Comment sélectionner
Selecting a power line common mode choke in four steps
Work from the failing frequency band outward to current, losses and board space.
- 01
Identify the failing band
Read the frequency range where your conducted emission scan exceeds the limit. That band, not a general noise complaint, decides which impedance curve you need.
- 02
Match the impedance curve
Pick a part whose common mode impedance peaks across the failing band. Read the impedance at that frequency, not the headline figure at the family's peak.
- 03
Check current and DC resistance
The rated current must cover the worst-case load with margin. DC resistance sets the voltage drop and the heat the winding has to shed.
- 04
Confirm the mechanical fit
Check size, land pattern and clearance to neighbouring parts, then re-scan on your own board because layout changes the result.
Parameters
Reading common mode choke ratings
Impedance is a curve, not a single number, so read the test frequency with the value.
Courant nominal
The continuous current the winding carries under stated temperature-rise conditions. Derate for ambient temperature and restricted airflow inside the enclosure.
DC resistance
Winding resistance, usually a maximum figure. It sets the conduction loss and the voltage drop the supply has to tolerate at full load.
Common mode inductance
Measured with both windings in the common mode configuration. Higher inductance generally moves the impedance peak toward lower frequencies.
Leakage inductance
The part of the winding that does not couple. It acts on differential signals and can be useful, but it also limits how high a current the part handles.
Withstand voltage
Isolation between the two windings under a stated test. Select against the safety requirement that applies to the equipment, not the working voltage.
Comparer
Common mode choke families side by side
Size band drives impedance and current capability more than family naming does.
Revenir au sélecteur ↑| Dimensions (L×l×H max.) | Références | Z (Ω) à 100 MHz/0,1 V, min. | Z (Ω) à 100 MHz/0,1 V, réf. | Résistance DC (mΩ), max. | Courant nominal DC (A), max. | Résistance d’isolement (MΩ), min. | Tension nominale (V), max. | Action |
|---|---|---|---|---|---|---|---|---|
| 1211 | 7 | 80, 500, 600, 750, 2200, 2300 | 230, 700, 800, 1000, 2500, 2700 | 2, 4, 6, 8, 14, 35, 50 | 1.5, 1.8, 6, 8, 10 | 10 | 125 | Filtrer → |
| 1513 | 5 | 225, 400, 500, 800, 1200 | 300, 500, 700, 1000, 1500 | 5, 6, 7, 10, 23 | 5, 9, 10, 13 | 10 | 80 | Filtrer → |
| 4520 | 14 | 60, 90, 180, 200, 250, 300, 350, 500, 650, 800, 1000, 1200, 1800, 2500 | 90, 150, 230, 300, 380, 420, 500, 700, 900, 1000, 1200, 1400, 2000, 3000 | 35, 40, 45, 50, 55, 58, 60, 70, 80 | 1, 1.5, 1.9, 2.0, 2.1, 2.2, 2.4, 2.5, 3, 3.2 | 10 | 50 | Filtrer → |
| 7060 | 9 | 40, 100, 225, 275, 500, 800, 910, 2000, 2500 | 70, 140, 300, 450, 700, 1020, 1300, 2700, 3000 | 5, 10, 15, 17, 21, 63, 75 | 0.9, 1, 2.5, 3, 4, 5, 9, 15 | 10 | 125 | Filtrer → |
| 9070 | 6 | 225, 450, 500, 750, 1700, 2500 | 300, 600, 700, 1000, 2200, 3000 | 6, 8, 10, 13, 60, 75 | 2.5, 3, 4, 5, 5.5, 6 | 10 | 50 | Filtrer → |
Analyse de l’application
Where power line common mode chokes are fitted
Confirm the line current, the failing band and how much board space the filter can take.
AC mains input filtering
- Confirm the line current and the failing band from the conducted scan, then verify the withstand voltage meets the equipment safety case.
DC power distribution
- Check the rated current against the worst-case load and confirm DC resistance does not push the rail below tolerance at full draw.
Motor drives and inverters
- Switching noise is broadband. Verify the impedance curve covers the whole failing range, not just the fundamental switching frequency.
Industrial power supplies
- Space and temperature rise usually decide. Confirm the derated current at the real ambient inside the enclosure.
Documents
Common mode choke datasheets and drawings
Datasheets carry the impedance curve, current rating and recommended land pattern.
Affichage de jeux de fichiers disponibles représentatifs. Recherchez un SKU précis.
- 41
- Fiches techniques PDF répertoriées
- 1
- Jeux de fichiers 3D répertoriés
- 0
- Empreintes PCB répertoriées
Le contenu produit publié par VOOHU est vérifié par son équipe technique. Les caractéristiques, les téléchargements et les informations d’assistance technique sont associés à des références précises afin que vous puissiez les vérifier avant de demander des échantillons ou un devis.
Présentation de la catégorie
How a common mode choke works and how to choose one
Most selection mistakes here come from treating impedance as a single number, or from confusing common mode with differential mode noise.
Discuter d’une nouvelle conception
Contacter l’équipe FAE pour une évaluation de remplacement.
Vous avez déjà une référence ? Demander des échantillons ou un devis.
Common mode versus differential mode
Differential noise travels out on one conductor and back on the other. Common mode noise travels the same direction on both and returns through ground. A choke winds both conductors on one core so their supply currents cancel, while common mode current sees a high impedance. That is why it filters one and passes the other.
Impedance is a curve
The headline impedance figure is measured at one frequency. What matters is whether the curve is high across the band where your conducted emission scan actually fails. A part with a higher peak in the wrong place will not help. Read the curve from the datasheet, identify your failing band first, and match the two.
What limits the choice
Rated current and DC resistance set the ceiling. A choke with excellent impedance is useless if the winding cannot carry the load current, or if its resistance drops the rail below tolerance. Check those against worst case, then confirm on your own board, because layout and the rest of the filter change the measured result.
FAQ
Common mode choke questions engineers ask
Answers cover how the choke works, how to read impedance and where it belongs.
What does a common mode choke actually do?
It winds both conductors of a line on one shared core. Supply current flows out on one and back on the other, so the two magnetic fields cancel and the choke is almost invisible to it. Common mode noise flows the same direction on both conductors, its fields add, and the choke presents a high impedance that blocks it.
What is the difference between common mode and differential mode noise?
Differential noise travels out on one conductor and back on the other, between the two lines. Common mode noise travels the same direction on both and returns through ground or chassis. A common mode choke is built to block the second kind while passing the first, which is why it filters supply lines without dropping the supply.
How do I read the impedance figure?
Impedance is a curve across frequency, and the headline number is measured at one stated point. Start from the frequency band where your conducted emission scan fails, then read each candidate's impedance at that frequency. A part with a higher peak somewhere else will not fix your specific failure.
Is a common mode choke the same as a common mode filter?
In everyday use the terms overlap, but a filter usually means the whole network, including Y capacitors and sometimes a differential inductor, while the choke is one component in it. When you specify a part, specify the choke. When you design the stage, think about the whole filter and how its parts interact.
Why does rated current matter so much?
The winding has to carry the full supply current continuously. Exceeding the rated current drives temperature rise beyond what the part was qualified for, and in ferrite parts it can push the core toward saturation, at which point the impedance collapses and the filtering stops working. Derate for the real ambient temperature.
Should I choose a toroidal or an SMD part?
Toroidal parts generally offer higher impedance and current capability for a given cost, at the price of board area and height. SMD parts suit automated assembly and tighter boards. Start from the impedance and current you need, then let the mechanical constraints decide which construction fits.
Why does the choke work on the bench but not in the product?
Because the measured result depends on the whole loop, not just the component. Layout, the position of the filter relative to the noise source, the ground return path and the rest of the filter network all change what the scan sees. Always confirm on the real board in the real enclosure.
How do I request common mode choke samples or a quote?
With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the line voltage and current, the frequency band where your scan fails and the space available on the board, and a sales engineer will shortlist candidates.
Assistance technique
Poursuivre après la sélection du produit
Envoyez la référence candidate et la condition à examiner. Vous pourrez demander des échantillons une fois la sélection précisée ; les questions commerciales peuvent être abordées au cours du même échange technique.
- 1Références sélectionnées
- 2Analyse technique
- 3Demande d’échantillons
- 4Échange commercial
Pour une étude de remplacement
- Référence d’origine et fiche technique
Indiquez la révision du document
- Conditions de fonctionnement
Température, tension d’isolement et conditions de courant PoE prises comme référence
- Contraintes du boîtier
Nombre de broches, pas et espacement entre les rangées de broches
- Phase du projet et volume annuel
Pour faciliter la priorisation des échantillons et de l’évaluation
- Date d’analyse souhaitée
Date à laquelle vous avez besoin de références candidates et d’un comparatif des différences
L’analyse technique identifie les références candidates et explique les différences.
Pour des échantillons et un devis
- Références candidates
Issues du sélecteur ou de l’analyse technique
- Quantité et phase du projet
Prototypage / présérie / production
- Date de livraison requise
Précisez séparément les délais des échantillons et de la production
- Documentation requise
Documents de conformité, déclarations de matières ou rapports de tiers
La quantité d’échantillons, le délai et le coût dépendent de la phase du projet et de la référence. L’équipe commerciale répond les jours ouvrés.
Études de remplacement publiées
Comparatif de sélection de transformateurs push-pull : VOOHU WHST06Q02E0 et Würth Elektronik 750316819
Voir toutes les alternatives
