WHSM2415T0 10G BASE-T SINGLE PORT 24PIN

Fitrware temperature may fall at -40 & Deg; C to +85 & Deg; C Industrial 10G power port. The typical scenes are industrial exchanges, 10G power lines and wide temperature edges in outdoors. WHSM2415T0 is a single port 10G BASE-T transformer with specifications for PoE Support 30W. The port power supply budget is based on this level and does not rank higher. Note -40 & Deg; C is the working temperature of the device, which is not equal to the confirmed cryogenic and cold start of the whole machine, which still needs to be measured on the target Phy and cable.

Each magnetic channel supports 360 maA DC balance current, with two channels totalling 720 maA. 720 MA is not a 360 MA multiplied by the number of wires, but the total caliber of the port at the same time as the channel; the copper aluminum is designed to be equal to 360 MA per piece, and the width is calculated according to the actual copper thickness and the permitted temperature rise. The working temperature limit for WHSM2415T0 already contains the temperature increase of the device and is not superseded to the upper limit for the full-load budget.

viewers: Require -40 & Deg; C to +85 & Deg; C select WHSM24015T0, 0 & Deg; C to +70 & Deg; C select WHSM2415N0, which is usually more advantageous in terms of cost and supply. The PoE caliber in both sections is fully consistent with the rest of the electrical block, and the temperature ceilings include the temperature of the device. The remodel does not change the electrical design.