WHSG24701G Single Port SMD Gigabit Base-T PIN24 non-PoE LAN Transformer
Request a Quote
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Contact Sales
Reach our sales team for pricing and lead time.
Submitted
We have received your request. Our sales team will contact you within 1 business day.
技術的なサポートが必要な場合は、カスタマーサービスを追加するには下のボタンをクリックしてください or サンプルリクエストページにアクセスしてくださいフォームに記入します。できるだけ早く対応させていただきます。
テクニカル サポート 電子メール: fae.thorne@voohu.cn 電話: +86 400-1048-018
詳細については、こちらをご覧ください。ダウンロードセンター書類を入手するか、下のボタンをクリックしてカスタマーサービスを追加してください。できるだけ早く対応させていただきます。
少量の注文の場合は、次のサイトで直接注文できます。VOOHUショップ。当社は、便利で効率的なプロセスで VAT 一般/特別請求書をサポートします。
技術サポートやサンプルリクエストについては、こちらまでお問い合わせください。下のボタンをクリックしてください顧客サービスを追加するため、またはサンプルリクエストページにアクセスしてくださいフォームに記入します。できるだけ早く対応させていただきます。
カスタマーサービス 電子メール: Song.lei@voohu.cn 電話: +86 180 2130 1120
WHSG24701G Cross Reference
VOOHU WHSG24701G can replace Pulse Electronics H5004NL. See the evaluation reports below for details.
| Manufacturer | Part Number | Relationship | Evaluation |
|---|---|---|---|
| Pulse Electronics | H5004NL | Replacement | H5004NL evaluation report |
Based on VOOHU replacement evaluations. Check both datasheets and validate with samples before switching.
The WHSG24701G suits indoor Gigabit ports where the component temperature stays between 0 °C and +70 °C.Typical uses are the LAN ports of desktop switches and home routers, set-top box ports, office IP cameras and Gigabit management ports inside a rack. The WHSG24701G is a single-port, non-PoE 100/1000 BASE-T transformer, so the port has to be powered locally.
Where the equipment must power up below 0 °C or sit in an outdoor enclosure, move to the wide-temperatureWHSG24701TG, which keeps the same land pattern and pin assignment. Other options are listed in the100/1000 BASE-T range.
No. The datasheet assigns no DC balance current capability to the centre taps of the WHSG24701G, so the four MCT and TCT pairs cannot be used as a supply path.There is no current item among its eleven electrical entries. Terminate the centre taps according to the reference design for the target PHY.
Note that the 8 mA DC bias quoted on the OCL line is not a permitted load current – it is a direct current superimposed during the inductance measurement, so that the figure reflects the core with a DC component present. Where the port has to deliver power, take a part in the same package that carries a published current rating, such as theWHSG24702PG.
Decide on temperature: take theWHSG24701TGfor -40 °C to +85 °C, or the WHSG24701G where 0 °C to +70 °C is enough and usually better on cost and availability.The two are electrically identical – same inductance, resistance, segmented insertion and return loss, crosstalk, common-mode rejection and isolation conditions – and neither carries a PoE current rating.
One difference is easy to miss: the WHSG24701TG is rated for storage to +125 °C where the WHSG24701G stops at +85 °C, which matters for projects with harsh warehousing. Switching between the two changes neither the electrical design nor the land pattern.
