WHSM24P02N0 10G Base-T Single Port SMT 24Pin LAN Transformer
Request a Quote
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Contact Sales
Reach our sales team for pricing and lead time.
Submitted
We have received your request. Our sales team will contact you within 1 business day.
For technical assistance, pleaseclick the button below to add customer service or visit the sample request pageto fill out the form. We will serve you as soon as possible.
Technical Support Email: fae.thorne@voohu.cn Phone: +86 400-1048-018
For more details, please visit theDownload Centerto get documents or click the button below to add customer service. We will serve you as soon as possible.
For purchases and small-volume orders, please contact our sales team. We support VAT general/special invoices with a convenient and efficient process.
For technical assistance or sample requests, pleaseclick the button belowto add customer service orvisit the sample request pageto fill out the form. We will serve you as soon as possible.
Customer Service Email: song.lei@voohu.cn Phone: +86 180 2130 1120
WHSM24P02N0 Cross Reference
VOOHU WHSM24P02N0 can replace Pulse Electronics H7008NL. See the evaluation reports below for details.
| Manufacturer | Part Number | Relationship | Evaluation |
|---|---|---|---|
| Pulse Electronics | H7008NL | Replacement | H7008NL evaluation report |
Based on VOOHU replacement evaluations. Check both datasheets and validate with samples before switching.
No. The datasheet assigns no DC balance current capability to the centre taps of the WHSM24P02N0, so they cannot be used as a supply path.The WHSM24P02N0 handles signal transformation and isolation for a 10G BASE-T port, and power for the port has to come from the equipment itself.
If the port must run wide-temperature and also deliver power, move to a part that publishes a DC balance current figure, such as theWHSM24015T0. If the target current is higher than that part provides, send us the per-port current and temperature you need and we will reselect.
The WHSM24P02N0 suits industrial 10G data ports where the component temperature may fall anywhere between -40 °C and +85 °C.Typical uses are industrial switches, 10G uplinks inside outdoor enclosures, wide-temperature edge computing units and factory-floor gateways. The WHSM24P02N0 carries no PoE rating, so the port is powered by the equipment itself.
Note that -40 °C is the component's lower operating limit, not a demonstrated cold-start capability for the finished product – low-temperature power-up still has to be measured with the target PHY and cable. Other options are in the10G BASE-T range.
On the criteria that drive selection the WHSM24P02N0 and theWHSM24P01N0are interchangeable: both operate from -40 °C to +85 °C, share the same storage range, neither supports PoE, and the electrical block is the same.The one documented difference is in the reflow note.
The WHSM24P02N0 measures the dwell within 3 °C of the actual peak, where most parts in this speed class state 5 °C, so check your line profile against the tighter of the two. Where both parts qualify, decide on availability and on what is already in the bill of materials.
