WHSQ24015-1PG Single Port SMD 2.5G/5G PIN24 PoE+ Ethernet transformer

Specify PoE Support 30W, each magnetic channel supports 720 ma DC balance curent. 720 MA is the capacity of a single central pump path, and the specifications do not print the totals of the entire channel and therefore cannot be multiplied by four to produce the total current of the port. Neither the IEEE 802.3 clause nor the PoE grade name are printed in the WHSQ24015-1PG specifications, 30 W is the formulation of this paragraph itself. Bronze is designed on a balanced basis of four paths per article 720 MA, and the copper width is calculated by the actual copper thickness and permitted temperature rise.

2.5G/5G equipment that requires work in the range -40 & Deg; C to +85 & Deg; C and which simultaneously requires power from the centre's head. WHSQ24015-1PG is a single-end, 24 PIN-based 2.5/5G BASE-T transformer with typical scenarios of multiple gigabytes of power, wide-temperature wireless access points and Internet camera ports in industry and outdoors. Note that -40 & Deg; C is the working temperature threshold for the device, which does not mean that the whole machine has been certified for cryogenic start, and that cryogenic uplifting is still measured on target PHY and cable.

Wats are the same, but different for each channel current: WHSQ24015-1PG for each magnetic channel 720 ma DC balance curent and WHSQ24015G for 350 ma. The temperature ranges for both sections are also different — — WHSQ24015-1PG Cover -40 & Deg; C to +85 & Deg; C, WHSQ24015G to 0 & Deg; C to +70 & Deg; C. See 30 W, this sentence does not represent the same current abundance in both paragraphs, and the selection should be based on the DC balance current instead of the watts per channel. A single-centre pump path may have a steady current of more than 350 mA, or a device should be selected for WHSQ24015-1PG if it is to be powered at 0 & dig; C below.