WHDG96504PTG Quad Ports DIP Gigabit Base-T PIN96 PoE LAN Transformer
Request a Quote
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Contact Sales
Reach our sales team for pricing and lead time.
Submitted
We have received your request. Our sales team will contact you within 1 business day.
For technical assistance, pleaseclick the button below to add customer service or visit the sample request pageto fill out the form. We will serve you as soon as possible.
Technical Support Email: fae.thorne@voohu.cn Phone: +86 400-1048-018
For more details, please visit theDownload Centerto get documents or click the button below to add customer service. We will serve you as soon as possible.
For purchases and small-volume orders, please contact our sales team. We support VAT general/special invoices with a convenient and efficient process.
For technical assistance or sample requests, pleaseclick the button belowto add customer service orvisit the sample request pageto fill out the form. We will serve you as soon as possible.
Customer Service Email: song.lei@voohu.cn Phone: +86 180 2130 1120
Mechanically yes, in orientation no. On the WHDG96504PTG pins 1–48 are the chip side, matching the WHDG96502PTG; on theWHDG96503PTGpins 1–48 are the cable side.
All three PTG parts share one 96-pin land pattern and one pin-numbering scheme, and only the side labelling splits into two camps. Before changing from one to another, check the chip-side and cable-side labels on each drawing rather than inferring from pin numbers.
Not as an 802.3bt part. The WHDG96504PTG datasheet states IEEE 802.3at compliant performance with 720 mA current capability.
Type 3 and Type 4 under 802.3bt draw more current than the 802.3at class, and the figure cannot be extrapolated upward. A port running 802.3bt needs a device rated for that class; tell us the per-port current you are targeting and VOOHU will confirm the applicable scope against the current controlled document. Higher-current parts are listed in the100/1000 BASE-T range.
Four-port Gigabit PoE+ equipment where the component temperature can reach -40 °C or +85 °C.
The WHDG96504PTG needs roughly a 28 × 29 mm square area on the PCB with more than 14.50 mm of clearance above it, and is a through-hole part assembled by wave soldering. All four ports have the same structure, four channels each, with cross talk between them held to -30 dB Min across 1–100 MHz. Other port counts sit in the100/1000 BASE-T range.
