RJ45 Integrated Magnetics Connector: VOOHU SYT114Q066AA2A1D as a Replacement for HanRun HR915410AE
RJ45 Integrated Magnetics Connector: VOOHU SYT114Q066AA2A1D as a Replacement for HanRun HR915410AE
1. Competitor Product Overview (HanRun Electronics Company Limited)
HanRun (HanRun Electronics Company Limited) is a connector and magnetics manufacturer based in Zhongshan, Guangdong, China. The HR915410AE is a 1×4 quad-port Tab-Down RJ45 jack with integrated 10/100/1000Base-T magnetics and a green (left)/yellow (right) bi-color LED per port, targeting gigabit hub and switch applications. It specifies OCL 350µH min, turn ratio 1CT:1CT, insertion loss ≤1.0dB, isolation 2250V DC, 750-cycle durability, ≤5 lbs mating force, and both operating and storage temperature -40 to +85°C (industrial grade). The housing is PA66 GF (UL94V-0), the shield is 0.20mm nickel-plated brass, and the terminals are phosphor bronze (0.35mm, 30µin gold on the contact area). It is rated to meet or exceed IEEE 802.3ab and is a UL Recognized Component (File # E330599).
2. VOOHU Replacement Overview (Suzhou VOOHU Electronic Technology Co., Ltd.)
The VOOHU SYT114Q066AA2A1D, designed and manufactured by Suzhou VOOHU Electronic Technology Co., Ltd., is a Tab-Down quad-port (1×4) RJ45 jack with integrated magnetics for 10/100/1000Base-T Ethernet. It matches the HR915410AE on OCL (350µH), turn ratio (1CT:1CT), return loss (-20/-16/-12/-10dB, all four bands identical), insertion loss (≤1.0dB), isolation (2250V DC), body width (≈59mm), 750-cycle durability, operating/storage temperature (both -40 to +85°C) and the green/yellow bi-color LED (green left, yellow right, 568/585nm, 20mA, 1.8–2.8V), and improves on crosstalk (-40/-35/-30dB vs -30/-26dB). It is REACH & RoHS compliant, making it a pin-to-pin replacement candidate for the HR915410AE.
3. Key Parameter Comparison
The table below uses the HanRun HR915410AE datasheet parameters as the baseline, with the corresponding VOOHU SYT114Q066AA2A1D specs filled in (only parameters specified by both and matchable one-to-one are listed).
| Parameter | HanRun HR915410AE | VOOHU SYT114Q066AA2A1D |
|---|---|---|
| Type / Structure | Quad-port (1×4) RJ45 magjack (Tab-Down, green/yellow LED) | Quad-port (1×4) RJ45 magjack (Tab-Down, green/yellow LED) |
| Data Rate | 10/100/1000Base-T | 10/100/1000Base-T |
| Turns Ratio | 1CT:1CT | 1CT:1CT (±2%) |
| OCL | 350µH Min @100kHz/100mV/8mA DC | 350µH Min @100kHz/100mV/8mA DC |
| Insertion Loss | -1.0dB Max (0.3–100MHz) | -1.0dB Max (1–100MHz) |
| Return Loss | -20dB Min (1–10MHz); -16dB Min (10–30MHz); -12dB Min (30–60MHz); -10dB Min (60–80MHz) | -20dB Min (1–10MHz); -16dB Min (10–30MHz); -12dB Min (30–60MHz); -10dB Min (60–80MHz) |
| Crosstalk | -30dB Min (1–60MHz); -26dB Min (60–100MHz) | -40dB Min (1–30MHz); -35dB Min (30–60MHz); -30dB Min (60–100MHz) |
| CMR | -30dB Min (1–50MHz); -20dB Min (50–150MHz) | -30dB Min (1–100MHz) |
| Hi-Pot (Isolation) | 2250V DC (0.5mA, 60s) | 2250V DC & 1500V AC (1mA, 6s) |
| LED Color / Wavelength | Green 568nm / Yellow 585nm | Green 568nm / Yellow 585nm |
| LED Forward Current | 20mA (green/yellow) | 20mA (green/yellow) |
| LED Forward Voltage | 1.8–2.8V (green/yellow) | 1.8–2.8V (green/yellow) |
| Body Size W×D | 59.00 × 21.20 mm | 59.06 × 21.10 mm |
| Durability | 750 cycles Min | 750 cycles Min |
| Mating Force | 5 lbs Max (≈22.2N) | 23N Max |
| Operating Temp. | -40°C to +85°C | -40°C to +85°C |
| Storage Temp. | -40°C to +85°C | -40°C to +85°C |
| Housing | PA66 GF, UL94V-0, black | PBT, UL94V-0, black |
| Shield | Brass, nickel-plated, 0.20mm | C2680, nickel-plated, 0.20mm |
| Terminal | Phosphor bronze, 0.35mm, 30µin gold on contact | Phosphor bronze C5210, 0.35mm, 6µin gold on contact |
Notes:
- All table parameters are taken strictly from the two datasheets (HanRun HR915410AE / VOOHU SYT114Q066AA2A1D); only items specified by both and matchable one-to-one are listed. Items missing on either side are not tabulated.
- Matching key items: OCL (both 350µH), turn ratio (both 1CT:1CT), return loss (all four bands identical), isolation (both 2250V DC), durability (both 750 cycles), operating and storage temperature (both -40 to +85°C), LED (green 568nm/yellow 585nm, 20mA, 1.8–2.8V — identical) and body width (≈59mm).
- VOOHU advantage: crosstalk (-40/-35/-30dB) better than -30/-26dB; insertion loss ≤1.0dB across the full 1–100MHz band, on par with the competitor.
- Dielectric test conditions differ slightly: HanRun 2250V DC / 0.5mA / 60s; VOOHU 2250V DC / 1mA / 6s and additionally rated 1500V AC. Both are rated 2250V DC.
- Return loss and crosstalk use different frequency-band definitions; values are reproduced as-specified without conversion.
- CMR: HanRun specifies -30dB over 1–50MHz and -20dB over 50–150MHz; VOOHU -30dB Min over the full 1–100MHz (tighter in the 50–100MHz range). Both meet gigabit Ethernet requirements.
- Contact gold plating differs: HanRun 30µin gold / 50µin nickel, VOOHU 6µin gold; both use 0.35mm phosphor bronze terminals and are rated to the same 750-cycle durability.
- Items HanRun lists that VOOHU does not tabulate (e.g. unmating force 5 lbs Max, plug-to-jack retention 20 lbs Min) are omitted; the VOOHU datasheet additionally provides a wave-solder profile (tip 260±5°C, Sn96.5/Ag3/Cu0.5).
- Body size is compared as width×depth (HanRun 59.00×21.20mm, VOOHU 59.06×21.10mm, both critical datasheet dimensions); HanRun lists an overall height of 13.40mm while the VOOHU datasheet does not separately specify overall height, so height is not tabulated.
- Pinout/footprint: both are 1×4 quad-port gigabit RJ45 magjacks with green (left)/yellow (right) bi-color LEDs; confirm full pin-to-pin/footprint compatibility against actual samples and the PCB layout before mass production.
4. Applications
- Multi-port 1000Base-T RJ45 ports in switches, routers, hubs and gateways.
- High-density quad-port panels in Ethernet/PoE switches (4 ports per module, saving PCB area).
- Wide-temperature scenarios such as industrial Ethernet and industrial switches (-40 to +85°C particularly suitable).
- NVRs, security hosts, servers and industrial computers requiring multi-port gigabit network interfaces.
- Multi-port RJ45 applications requiring integrated magnetics with green/yellow bi-color status LEDs.
5. FAQ
Q1: Can the VOOHU SYT114Q066AA2A1D replace the HanRun HR915410AE?
Both are 1×4 quad-port RJ45 magjacks (Tab-Down, green-left/yellow-right bi-color LED) and match on OCL (350µH), turn ratio (1CT:1CT), return loss, isolation (2250V DC), body width (≈59mm), durability (750 cycles) and operating/storage temperature (-40 to +85°C), so the VOOHU part is a pin-to-pin replacement candidate. Sample validation against the actual PCB layout is recommended before mass production.
Q2: What are the main differences?
The key electrical and mechanical specs are highly aligned; VOOHU offers better crosstalk (-40/-35/-30dB vs -30/-26dB). Note the contact gold-plating thickness (VOOHU 6µin vs HanRun 30µin) and the different CMR band definitions, though both share 750-cycle durability and meet gigabit Ethernet requirements.
Q3: Is it 1000Base-T / IEEE 802.3 compliant?
Yes, both are 10/100/1000Base-T magnetics modules with 2250V DC isolation, meeting IEEE 802.3ab requirements.
Q4: Are samples available?
Yes. Sample orders ship within 48 hours and arrive within 7 days.
Q5: How can I contact VOOHU?
TEL: +86 400 1048 018; WEB: www.voohuele.com; Technical support: song.lei@voohu.cn.
Why VOOHU?
One-stop sourcing: connectors + magnetics + interface chips, full support from selection to small-batch production.
Custom solutions: just share your application requirements and budget to get a tailored solution with professional technical support.
Fast development: direct from the manufacturer, rapid FAE response, efficient sampling, shorter time-to-market.
Core qualifications: ISO9001, ISO14001, RoHS, REACH; two in-house factories ensure delivery and quality.
For more information, visit VOOHU: China www.voohu.cn | Overseas www.voohuele.com | Technical support: song.lei@voohu.cn
