JL5109 100M Ethernet Switch IC

Eight external ports on the panel plus one MII uplink so the host controller can join the network, typically for management, remote access or host-originated traffic. It is the configuration for a mid-size managed switch where port density and host access are both required.

The listed part carries the NC suffix, covering 0 to 70 degrees. If your product needs an industrial range, tell us the required temperature and our engineers will confirm what is currently available, rather than assuming a grade exists because other series offer one.

Both provide eight external ports with an MII uplink in a QFN88 package at 10 by 10 millimetres. JL5110 has two uplinks rather than one, which allows a host connection and a cascade to another switch at the same time. Choose on whether you need that second link.

Eight copper ports each need magnetics and a controlled impedance pair to the connector, plus the MII uplink routing to the host. Decide the panel arrangement and the device placement early, then verify link stability and emissions on a prototype board.

With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the external port count, the host interface and the operating temperature range you require.

Yes. VOOHU distributes JLSemi parts as an authorized distributor, JL5109C-NC included, from prototypes to series builds. Send your forecast and we will confirm availability.

It depends on the host. The JL5109 adds an MII port so the processor joins the network; the JL5108 has eight ports, no host port and a QFN64 package at 9 × 9 mm.

Neither is listed; the datasheet (PDF) is the only file. Draw the QFN88 footprint and the 10 × 10 mm outline from its package drawing.