Skip to main content
VOOHU Low Height RJ45 Connectors products

I/O Connector products

Low Height RJ45 Connectors

Low height housings reduce the clearance needed above the board, for slim enclosures and stacked assemblies where a standard jack will not fit. Confirm the panel cutout position moves with the body height before finalising the enclosure.

For OEM and volume orders. MOQ is one full reel, tray or tube per part.

  • Own factories: connectors in Dongguan, magnetics in Mianyang
  • 1,500+ customers, including 150+ listed companies
  • ISO 9001 and ISO 14001 certified
  • Certificates and test reports →

Part number search & selector

Find Low Height RJ45 Connectors part numbers

Filter low profile RJ45 jacks by tab, integrated magnetics, data rate, LEDs, shield tabs and EMI gasket.

* Frozen Image and Part Number columns · drag horizontally to review all specifications

Low Height RJ45 Connectors product selection results
Image Part number Datasheet Compare Downloads CategoryConnector TypePortsTabIntegrated Connector ModulesData RatePoELEDMounting MethodShield TabsEMI / GasketOperating Temperature Sample
VOOHU SYT811B198FA2A10DQB Low Height RJ45 Connectors SYT811B198FA2A10DQB SPEC RJ45(Low Height)90°1 x 1UpYES10/100MNon-PoEG/YDIPYESYES-40 to +85°C
VOOHU SYT811B198FN4A10DQB Low Height RJ45 Connectors SYT811B198FN4A10DQB SPEC RJ45(Low Height)90°1 x 1UpYES10/100MNon-PoEGO/YDIPYESYES-40 to +85°C
VOOHU SYT60A1188AB1A6DB3187 Low Height RJ45 Connectors SYT60A1188AB1A6DB3187 SPEC RJ45(Low Height)90°1 x 1DownNOALLNon-PoEG/YDIPYESNO-40 to +85°C
VOOHU SYT811Q008FD1A2D057 Low Height RJ45 Connectors SYT811Q008FD1A2D057 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoEY/GDIPYESYES-40 to +85°C
VOOHU SYT1611Q008CD1A10DB057 Low Height RJ45 Connectors SYT1611Q008CD1A10DB057 SPEC RJ45(Low Height)90°1 x 1DownYES100/1000MNon-PoEY/GDIPYESNO-40 to +85°C
VOOHU SYT1611Q008CA1A10DB Low Height RJ45 Connectors SYT1611Q008CA1A10DB SPEC RJ45(Low Height)90°1 x 1DownYES100/1000MNon-PoEY/GDIPYESNO-40 to +85°C
VOOHU SYT1611Q002GWA2D057 Low Height RJ45 Connectors SYT1611Q002GWA2D057 SPEC RJ45(Low Height)90°1 x 1DownYES100/1000MNon-PoENO LEDDIPYESNO-40 to +85°C
VOOHU SYT1511Q184CB2W4CBD057 Low Height RJ45 Connectors SYT1511Q184CB2W4CBD057 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoEG/YDIPYESNO-40 to +85°C
VOOHU SYT811Q008HWA2DC057 Low Height RJ45 Connectors SYT811Q008HWA2DC057 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoENO LEDDIPYESYES-40 to +85°C
VOOHU SYT811Q008GWA2DB057 Low Height RJ45 Connectors SYT811Q008GWA2DB057 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoENO LEDDIPYESNO-40 to +85°C
VOOHU SYT811Q008CD2A2DC057 Low Height RJ45 Connectors SYT811Q008CD2A2DC057 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoEG/YDIPYESNO-40 to +85°C
VOOHU SYT60S1188JB1A6DY1008 Low Height RJ45 Connectors SYT60S1188JB1A6DY1008 SPEC RJ45(Low Height)90°1 x 1UpNOALLALLY/GDIPNONO-40 to +85°C
VOOHU SYT60S1188HWA6DY1008 Low Height RJ45 Connectors SYT60S1188HWA6DY1008 SPEC RJ45(Low Height)90°1 x 1UpNOALLALLNO LEDDIPYESYES-40 to +85°C
VOOHU SYT60S1188GWA6DY1008 Low Height RJ45 Connectors SYT60S1188GWA6DY1008 SPEC RJ45(Low Height)90°1 x 1UpNOALLALLNO LEDDIPYESNO-40 to +85°C
VOOHU SYT60S1188DB2A6DY1008 Low Height RJ45 Connectors SYT60S1188DB2A6DY1008 SPEC RJ45(Low Height)90°1 x 1UpNOALLALLG/YDIPYESYES-40 to +85°C
VOOHU SYT60S1188DB1A6DY1008 Low Height RJ45 Connectors SYT60S1188DB1A6DY1008 SPEC RJ45(Low Height)90°1 x 1UpNOALLALLY/GDIPYESYES-40 to +85°C
VOOHU SYT1211Q141FF3A10DC057 Low Height RJ45 Connectors SYT1211Q141FF3A10DC057 SPEC RJ45(Low Height)90°1 x 1DownYES10G Base-TNon-PoEGY/GDIPYESYES-40 to +85°C
VOOHU 99TGWHQ618G830415 Low Height RJ45 Connectors 99TGWHQ618G830415 SPEC RJ45(Low Height)90°1 x 1UpYES100/1000MNon-PoEOG/YDIPYESYES-40 to +85°C
VOOHU SYT60A1188AB2A3DB4175 Low Height RJ45 Connectors SYT60A1188AB2A3DB4175 SPEC RJ45(Low Height)90°1 x 1DownNOALLALLG/YDIPYESNO-40 to +85°C
VOOHU SYT60A1188HWA3DB4175 Low Height RJ45 Connectors SYT60A1188HWA3DB4175 SPEC RJ45(Low Height)90°1 x 1Up/DownNOALLALLNO LEDDIPYESYES-40 to +85°C

Series overview

Low profile RJ45 options for slim designs

A low profile RJ45 connector is a right angle Ethernet jack with a reduced body height, for boards close to the lid or base of a thin product. It is also listed as a low height RJ45 or slim RJ45 connector. Each part is a single 90° through-hole port rated −40 °C to +85 °C, as a plain jack or a MagJack (RJ45 jack with integrated magnetics) from 10/100M to 10GBASE-T. To move the opening instead, see offset RJ45 connectors.

01

MagJack or plain low profile jack

Most parts here carry integrated magnetics, such as the 100/1000M SYT811Q008CD2A2DC057. Plain low height jacks such as SYT60S1188DB2A6DY1008 leave the LAN transformer on the board, so you choose the magnetics separately.

02

Speed from 10/100M to 10GBASE-T

SYT811B198FA2A10DQB is rated 10/100M and SYT1211Q008FF1A10D057 100/1000M. For faster ports, SYT1611Q002FF3A2DC5057 is rated 5GBASE-T, while SYT1211Q141FF3A10DC057 and SYT1611Q002FF3A10DC057 are rated 10GBASE-T. Match the magnetics rating to the speed of your PHY.

03

LED colors or none

LED pairs include Y/G on SYT1611Q008CA1A10DB, GO/Y on SYT1511Q153CF5W7CBD057 and YG/G on SYT1611Q002FF3A10DC057. Parts such as SYT1611Q002GWA2D057 have no LEDs, for products that show link and activity on the front panel instead.

04

Shield tabs and EMI gasket

All but SYT60S1188JB1A6DY1008 have shield tabs. The EMI gasket varies: SYT811Q008HWA2DC057 has one and SYT811Q008GWA2DB057 does not. Choose the gasket version when the jack face must touch a metal panel.

Open the RJ45 Connectors and RJ11 Jacks selection guide →

Applications

Where low profile RJ45 jacks fit

These jacks suit products where the gap between board and lid is tight.

Computing

Mini PCs, thin clients and SBCs

Thin desktop units and single-board computers often put the Ethernet port under a low lid. SYT1511Q153CF5W7CBD057, a 100/1000M MagJack with GO/Y LEDs, comes with a PCB footprint as well as a datasheet and 3D model.

Multi-gig

Compact 5G and 10G ports

Small NAS boxes, adapters and edge devices with a fast copper port can use SYT1611Q002FF3A2DC5057, rated 5GBASE-T, or SYT1211Q141FF3A10DC057, rated 10GBASE-T; both are low height MagJacks with an EMI gasket.

Embedded

Set-top boxes and smart home hubs

Consumer boxes with a discrete transformer on the board can use plain low height jacks such as SYT60S1188GWA6DY1008, with no LEDs, or SYT60S1188DB1A6DY1008, with Y/G LEDs and an EMI gasket.

Documents

Low profile RJ45 datasheets and 3D models

Search by part number for the datasheet, 3D model or footprint, then check body height and port position against the enclosure.

29
PDF datasheets listed
24
3D file sets listed
2
PCB footprints listed

VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.

Sourcing

Sourcing low profile RJ45 jacks

VOOHU manufactures these low height jacks in its own connector factory in Dongguan. Every part has a datasheet and most a 3D model, with PCB footprints for SYT1511Q153CF5W7CBD057 and SYT1211Q008FF1A10D057.

01

Samples and quotations

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. Quotations need the part numbers, quantity and target build date; typical lead time is 7–10 days.

02

Replacing a low height jack

To replace a low height RJ45 you use now, send its part number and datasheet. Our FAE team compares body height, port position, magnetics, LEDs and footprint, then suggests VOOHU candidates to validate with samples before production.

03

Quality and compliance

VOOHU is ISO 9001 and ISO 14001 certified. VOOHU’s RJ45 connectors are RoHS and REACH compliant (third-party test reports). Since 2018 VOOHU has supplied more than 1,500 customers, including 150+ listed companies.

FAQ

Low profile RJ45 questions answered

Answers on manufacturing, PoE magnetics and low height versus offset jacks.

How much height do these save?

The saving against a standard housing is stated on each drawing rather than being uniform across the range. Compare the body height dimension directly between the standard and low height part you are considering, and check it against the clearance the enclosure actually allows.

Does a lower body change the panel cutout?

Yes, and this is the step most often missed. Reducing the body height moves the port opening relative to the board, so the panel aperture has to move with it. Check both the body height and the opening position on the drawing before the enclosure is tooled.

Is mechanical strength reduced?

A smaller housing has less material to resist the force of repeated plugging and cable strain. If the port is user accessible and will be plugged often, check the retention features on the drawing and consider whether the design needs additional mechanical support.

Can I still get shielding and magnetics?

Availability varies by part, because a lower body leaves less internal volume for magnetics in particular. Check the specific part number rather than assuming every option carries across from the standard range. Send your requirement if you need a particular combination.

How do I request samples or a quote?

With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the clearance available above the board, the panel aperture position and the expected mating cycles.

Is VOOHU a low profile RJ45 manufacturer?

Yes. VOOHU manufactures low profile RJ45 connectors, with and without integrated magnetics, in its own connector factory in Dongguan, China. Every part on this page has a datasheet, and most have a 3D model for checking lid clearance in CAD.

Can I use a low profile RJ45 MagJack on a PoE port?

Not with the parts on this page: the integrated magnetics in every low profile MagJack here are listed as Non-PoE. For a PoE port, look at the PoE-rated MagJacks in our RJ45 connector range, or ask our FAE team.

Low profile or offset RJ45: which do I need?

If the gap between board and lid is the problem, a low profile RJ45 lowers the body. If the panel opening sits higher or lower than a standard jack allows, an offset RJ45 connector moves the port instead.

Engineer support

Low profile RJ45 samples and engineering help

Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.

  1. 1Selected part numbers
  2. 2Engineering review
  3. 3Sample request
  4. 4Commercial discussion

For a replacement review

  • Original part and datasheet

    Include the document revision

  • Operating conditions

    Temperature, isolation voltage and PoE current basis

  • Package constraints

    Pin count, pitch and spacing between pin rows

  • Project stage and annual volume

    To help prioritize samples and evaluation

  • Target review date

    When you need candidates and a comparison of differences

Engineering review identifies candidate parts and explains the differences.

For samples and a quotation

  • Candidate part numbers

    From the selector or engineering review

  • Quantity and project stage

    Prototyping / pilot build / production

  • Required delivery date

    Specify sample and production timing separately

  • Required documentation

    Compliance documents, material declarations or third-party reports

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. Sales will respond on business days.

For OEM and volume orders. MOQ is one full reel, tray or tube per part.

Your information will be used only to respond to this support request.

Parameter comparison

Compare selected part numbers

Differences are presented for review; confirm final values and file revisions in each part-specific datasheet.