I/O Connector products
The straight variant mounts through the panel with the mating face and cable exit in line. Sealing to IP67 depends on correct panel mounting, a matching plug and the gasket seated properly, so check all three on the drawing.
Part number search & selector
Filter the 180° waterproof RJ45 sockets by docking type, pins, conversion, mounting, IP grade, panel thickness, electrical ratings, mating cycles and temperature.
* Frozen Image and Part Number columns · drag horizontally to review all specifications
| Image | Datasheet | Compare | Downloads |
Docking Type
|
Docking angle
|
Number of pins
|
Conversion Type
|
Installation Type
|
Waterproof grade
|
Panel thickness MAX (mm)
|
Rated voltage (V)
|
Rated current (A)
|
Contact resistance MAX (mΩ)
|
Insulation resistance MIN (MΩ@500V DC)
|
Compressive strength
|
MIN number of plug-in cycles
|
Operating temperature (°C)
|
Sample |
|---|
| Image | Part number | Datasheet | Compare | Downloads | Docking Type | Docking angle | Number of pins | Conversion Type | Installation Type | Waterproof grade | Panel thickness MAX (mm) | Rated voltage (V) | Rated current (A) | Contact resistance MAX (mΩ) | Insulation resistance MIN (MΩ@500V DC) | Compressive strength | MIN number of plug-in cycles | Operating temperature (°C) | Sample |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
WHPMWRJ1085 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | IP65 | 3 | - | - | - | - | - | - | -40℃~85℃ |
|
||
 |
WHZJT020299 | SPEC | Full Teeth | 180° | — | F/F | Panel Type | - | - | 125 | 1.5 | 30 | 500 | 1min@ 500V AC | - | - |
|
||
 |
WHZJT020297 | SPEC | Full Teeth | 180° | — | F/F | Panel Type | - | - | 125 | 1.5 | 30 | 500 | — | - | - |
|
||
 |
WHPMWRJ1127 | SPEC | Full Teeth | 180° | 8P8C | F/F | - | - | - | 300 | - | 5 | 10 | - | - | -40℃~85℃ |
|
||
 |
WHPMWRJ1065 | SPEC | Full Teeth | 180° | 8P8C | F/F | - | - | - | 300 | - | 5 | 10 | - | - | -40℃~85℃ |
|
||
 |
WHPMWRJ1003 | SPEC | Full Teeth | 180° | 8P10C | F/M（Pin） | Panel Type | IP67 | - | - | - | 5 | - | 10ms@300V dc | - | - |
|
||
 |
WHPMWRJ1022 | SPEC | Full Teeth | 180° | 8P8C | F/M（Pin） | Panel Type | - | 4 | - | - | - | - | - | - | - |
|
||
 |
WHPMWRJ3592 | SPEC | Full Teeth | 180° | - | - | - | IP67 | - | - | - | - | - | - | — | -40℃~85℃ |
|
||
 |
WHPMWRJ1049 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | IP67 | 3 | 125 | 1.5 | 30 | 500 | 1min@1000V AC | 750 | -40℃~85℃ |
|
||
 |
WH14800504A009 | SPEC | Full Teeth | 180° | 8P8C | F/M | - | - | - | - | - | 2000 | 20 | - | - | -30℃~80℃ |
|
||
 |
WH14800504A042 | SPEC | Full Teeth | 180° | 8P8C | F/M（Pin） | Panel Type | IP65 | - | 5 | 1 | 30 | 20 | - | - | -25℃~60℃ |
|
||
 |
WH10800400W024 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | - | - | - | - | - | - | - | - | - |
|
||
 |
WH10800408F005 | SPEC | Full Teeth | 180° | 8P10C | F/F | Panel Type | - | - | - | - | - | - | - | - | - |
|
||
 |
WHPMWRJ3088 | SPEC | Full Teeth | 180° | 8P8C | F/M | Panel Type | IP67 | 3 | - | - | - | - | - | - | - |
|
||
 |
WHPMWRJ5004 | SPEC | - | 180° | 8P8C | F/F | - | IP67 | - | 125 | 1.5 | 30 | - | 1min@1000V AC | - | - |
|
Broaden the selected filters or clear the current search.
Product family quick links
Counts reflect the current published product data.
Series overview
A 180° waterproof RJ45 socket carries the link straight through the enclosure wall, with the outside mating face and the inside connection on one axis, where there is depth behind the panel. These straight waterproof RJ45 sockets are also called waterproof RJ45 bulkhead connectors or waterproof RJ45 jacks. The range covers F/F, F/M and F/M (pin) conversions, 8P8C and 8P10C contacts, and IP67 or IP65 grades where listed. For a right-angle exit, see the 90° waterproof RJ45 sockets.
WHPMWRJ1049, WHPMWRJ1003, WHPMWRJ3088, WHPMWRJ3592 and WHPMWRJ5004 are listed at IP67; WHPMWRJ1085 and WH14800504A042 at IP65. Other rows show no grade, so confirm it on the datasheet. Any grade applies with the matching plug mated.
F/F parts such as WHPMWRJ1049 and WHPMWRJ1085 are female on both sides, so a patch cord plugs in behind the panel. F/M parts such as WHPMWRJ3088 and F/M (pin) parts such as WHPMWRJ1003 have a male inner side; the drawing shows how it terminates.
WHPMWRJ1049, WHPMWRJ1085 and WHPMWRJ3088 take panels up to 3 mm, and WHPMWRJ1022 up to 4 mm. Where no limit is listed, take it from the drawing before the wall thickness is fixed.
WHPMWRJ1049, WHPMWRJ1085, WHPMWRJ1127, WHPMWRJ1065 and WHPMWRJ3592 are rated −40 °C to +85 °C. WH14800504A042 covers −25 °C to +60 °C, which a cold outdoor site can fall below.
Applications
Choose a straight socket when the enclosure has room for the inside connection behind the wall.
Outdoor devices with space behind the housing wall can take a straight outdoor RJ45 connector. WHPMWRJ1049 pairs IP67 with a −40 °C to +85 °C rating; check UV or salt-spray exposure separately.
Control cabinets and machine panels often keep a patch cord inside. An F/F industrial RJ45 connector such as WHPMWRJ1085, IP65 with a 3 mm panel limit, lets that cord continue behind the wall.
Devices that terminate the link inside, without a patch cord, can get a sealed RJ45 entry from F/M or F/M (pin) parts such as WHPMWRJ3088 or WHPMWRJ1003, both listed at IP67.
Downloads & technical resources
Search by part number for the datasheet and any 3D model, then confirm the IP grade, panel limit and mating plug on the drawing.
Showing representative available file sets. Search to find a specific SKU.
VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.
Sourcing
VOOHU manufactures waterproof RJ45 connectors in its own connector factory in Dongguan. Every 180° socket here has a datasheet, and many also a 3D model; as panel parts they need no PCB footprint.
Discuss a new design
Contact FAE for a replacement assessment.
Already have a part number? Request samples or a quote.
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. Quotations need the part number, quantity and target date; typical lead time is 7–10 days.
To replace an IP67 RJ45 connector from another supplier, send its part number and datasheet. Our FAE team compares IP grade, panel thickness, conversion type, pin count and ratings, then shortlists VOOHU candidates for sample validation before production.
VOOHU is ISO 9001 and ISO 14001 certified. Since 2018 VOOHU has supplied more than 1,500 customers, including 150+ listed companies.
FAQ & related guides
Who makes them, which part lists every rating, and which parts have 3D models.
Protection against dust ingress and temporary immersion, achieved when the connector is correctly mounted, the gasket is seated and the mating plug is fitted and tightened. An unmated socket without its cap is not protected to that level, which is why caps are supplied on outdoor installations.
A stated range, given on the drawing along with the aperture size and any anti-rotation feature. A panel outside the range either prevents the nut engaging enough thread or leaves the gasket under-compressed, and in both cases the seal is compromised.
Straight exit needs depth in front of the panel for the cable to run away from the enclosure. The right angle version turns the cable at the connector, keeping it close to the panel. Choose from the installed mechanical arrangement rather than the electrical requirement.
In outdoor or washdown installations, yes. The sealing depends on the mated pair, so an open socket admits water and dust directly onto the contacts. A sealing cap maintains protection on ports that are not in use.
With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the panel thickness, the aperture available, the mating plug and the environment the port faces.
Yes. VOOHU manufactures its waterproof RJ45 connectors, including these 180° sockets, in its own connector factory in Dongguan, China. Every part number here has a datasheet you can download.
WHPMWRJ1049: IP67, 3 mm max panel, 125 V, 1.5 A, 30 mΩ max contact resistance, 500 MΩ min insulation resistance at 500 V DC, a 1,000 V AC one-minute withstand test and at least 750 mating cycles, from −40 °C to +85 °C. Use it as the reference when other rows leave fields blank.
WHPMWRJ1049, WHPMWRJ1085, WHPMWRJ1003, WHPMWRJ1127, WHPMWRJ1065, WHPMWRJ3592, WHZJT020299 and WHZJT020297 have a 3D model as well as a datasheet. The others currently have a datasheet only.
Engineer support
Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.
Include the document revision
Temperature, isolation voltage and PoE current basis
Pin count, pitch and spacing between pin rows
To help prioritize samples and evaluation
When you need candidates and a comparison of differences
Engineering review identifies candidate parts and explains the differences.
From the selector or engineering review
Prototyping / pilot build / production
Specify sample and production timing separately
Compliance documents, material declarations or third-party reports
Samples are free of charge. Sample quantity and lead time depend on the part number and project stage. Sales will respond on business days.
