Skip to main content
VOOHU 90° Locking RJ45 Adapters products

I/O Connector products

90° Locking RJ45 Adapters

A right angle adapter turns the cable through ninety degrees at the panel, keeping the cable close to the enclosure where depth behind the panel is limited. The self locking metal shell holds the mating under vibration.

Part number search & selector

Find 90° Locking RJ45 Adapters part numbers

Filter the 90° locking RJ45 adapter by dimensions, mounting, lock, mating cycles, contact ratings, temperature and humidity.

* Frozen Image and Part Number columns · drag horizontally to review all specifications

90° Locking RJ45 Adapters product selection results
Image Part number Datasheet Compare Downloads Wiring methodDimensions (L×W×H, mm)Installation/welding processLocking deviceNumber of plugging and unplugging (times)Contact rated current (DC)Contact rated voltage (AC)Operating temperatureOperating humidity Sample
VOOHU WHKNZ6390 90° Locking RJ45 Adapters WHKNZ6390 SPEC 90° Adapter28×33×34.753M self-tapping screwsLatch lock10001.5A125V-40 °C~+85 °C20~70%

Series overview

Right-angle locking RJ45 connector for panels

WHKNZ6390 is a 90° locking RJ45 connector in adapter form: it screws to the panel, latches the mated plug and turns the link through a right angle so the cable runs along the wall. It is also called a 90° locking RJ45 adapter, right angle RJ45 adapter or panel mount RJ45 adapter. For an in-line path, see the 180° straight-through feed-throughs.

01

Fixed with self-tapping screws

As a locking RJ45 panel mount part, WHKNZ6390 is held by self-tapping screws, so the enclosure wall carries the plugging force. Check that the panel material holds the thread.

02

Body envelope

WHKNZ6390 measures 28×33×34.75 mm; leave room behind the panel for the body and the turned cable.

03

Contact ratings and climate

WHKNZ6390 is rated 1.5 A DC and 125 V AC per contact, for −40 °C to +85 °C at 20–70% humidity.

04

Latch lock and mating cycles

The latch lock holds the plug against tugs and vibration; the part is listed for 1,000 mating cycles.

Open the Locking RJ45 Connectors selection guide →

Applications

Where this 90° locking RJ45 connector fits

It suits panels where the cable must leave sideways.

Pro AV

Shallow rack panels

With little depth behind a rack panel, WHKNZ6390 keeps a latching RJ45 port on the front and runs the cable along the panel.

Industrial

Cabinet side walls

On a cabinet side wall, the right-angle exit keeps the inside cable flat and clear of rails; −40 °C to +85 °C suits unheated cabinets.

Mobile

Carts and transport cases

Gear on carts or in transport cases gets bumped. A secure RJ45 port that locks the plug and turns the cable stays compact.

Downloads & technical resources

Locking RJ45 connector datasheet and 3D model

Search WHKNZ6390 for its datasheet and 3D model, then check the exit direction and screw holes.

1
PDF datasheets listed
1
3D file sets listed
0
PCB footprints listed

VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.

Sourcing

Buying the 90° locking RJ45 connector adapter

VOOHU manufactures this adapter, like its other locking RJ45 connectors, in its own connector factory in Dongguan. WHKNZ6390 has a datasheet and 3D model; a panel part needs no PCB footprint.

01

Samples and quotations

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. To quote, we need the quantity and required date; typical lead time is 7–10 days.

02

Replacing a right-angle adapter

If you use another supplier’s right-angle locking RJ45 adapter, send its part number and datasheet. Our FAE team compares outline, fixing, lock and ratings, then recommends VOOHU candidates, which you validate with samples ahead of production.

03

About VOOHU

VOOHU is ISO 9001 and ISO 14001 certified. Since 2018 VOOHU has supplied more than 1,500 customers, including 150+ listed companies.

FAQ & related guides

Questions about the 90° locking RJ45 connector adapter

The maker, climate limits and the link to the straight-through parts.

When do I need a 90 degree adapter?

When there is not enough depth behind the panel for a cable to exit straight, or when the cable must run along the enclosure rather than away from it. Turning the cable at the connector avoids a tight bend immediately behind the panel, which strains the terminations.

What does the locking mechanism do?

It holds the mating pair together mechanically, so the connection survives vibration and accidental pulling on the cable. A standard RJ45 latch relies on a small plastic tab, which is the usual failure point in industrial and mobile installations.

Which way does the exit face?

The orientation is fixed by the part, so the cable leaves in a defined direction once the connector is mounted. Check the drawing against your panel layout before ordering, because the exit direction cannot be changed after assembly.

Does the metal shell need grounding?

If the installation uses shielded cable and you want the screen carried to chassis, the shell needs a defined low impedance path to ground. Confirm how the panel mounting achieves that, because a shell that floats gives no shielding benefit.

How do I request samples or a quote?

With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the panel thickness, the depth available behind it and the required cable exit direction.

Is VOOHU the manufacturer of this 90° locking RJ45 connector?

Yes. VOOHU manufactures WHKNZ6390 in its own connector factory in Dongguan, China, and publishes its datasheet and 3D model for your outline review.

Can WHKNZ6390 be used in cold or wet locations?

Its −40 °C to +85 °C, 20–70% humidity rating covers cold, dry sites. No waterproof rating is listed; for wet locations, see the 90° waterproof RJ45 sockets.

Does it share a body with the 180° straight-through parts?

The 28×33×34.75 mm body is also listed for some 180° straight-through locking RJ45 connectors, with the same screw fixing and latch lock. Equal outlines do not prove a shared cutout; check each drawing.

Engineer support

90° locking RJ45 connector samples and FAE help

Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.

  1. 1Selected part numbers
  2. 2Engineering review
  3. 3Sample request
  4. 4Commercial discussion

For a replacement review

  • Original part and datasheet

    Include the document revision

  • Operating conditions

    Temperature, isolation voltage and PoE current basis

  • Package constraints

    Pin count, pitch and spacing between pin rows

  • Project stage and annual volume

    To help prioritize samples and evaluation

  • Target review date

    When you need candidates and a comparison of differences

Engineering review identifies candidate parts and explains the differences.

For samples and a quotation

  • Candidate part numbers

    From the selector or engineering review

  • Quantity and project stage

    Prototyping / pilot build / production

  • Required delivery date

    Specify sample and production timing separately

  • Required documentation

    Compliance documents, material declarations or third-party reports

Samples are free of charge. Sample quantity and lead time depend on the part number and project stage. Sales will respond on business days.

Your information will be used only to respond to this support request.

Parameter comparison

Compare selected part numbers

Differences are presented for review; confirm final values and file revisions in each part-specific datasheet.