Performance category
Confirm Cat5e/Cat6 in the part specification rather than inferring an absent category from its name.
I/O Connector products
Cat7A RJ45 Couplers
Cat7A extends the bandwidth specification above Cat7 for screened installations. As with Cat7, the benefit only survives if every connection preserves the screening, so confirm the interface used on site before ordering.
Part number search & selector
Find Cat7A RJ45 Couplers part numbers
The table uses the current English-site product records, published selection fields and part-specific technical-file links.
* Frozen Image and Part Number columns · drag horizontally to review all specifications
| Image | Datasheet | Compare | Downloads |
Network Level
|
Transmission Bandwidth
|
Shield
|
Gold plating of contacts
|
Panel
|
Sample |
|---|
| Image | Part number | Datasheet | Compare | Downloads | Network Level | Transmission Bandwidth | Shield | Gold plating of contacts | Panel | Sample |
|---|---|---|---|---|---|---|---|---|---|---|
 |
WHZJT020242 | SPEC | Cat6 | 250MHz | NO | - | YES |
|
||
 |
SYTUS030026SL | SPEC | Cat6 | 250MHz | NO | 50U | NO |
|
||
 |
WHKNZ63YSCAT6a | SPEC | Cat6 | 250MHz | — | 3U | YES |
|
||
 |
WHKNZ63CAT6a180 | SPEC | Cat6 | 250MHz | — | 3U | YES |
|
||
 |
WHZJT020295 | SPEC | Cat6 | 250MHz | YES | 6U | YES |
|
||
 |
SYTZT1188IWA17DY3S2T5E387A | SPEC | Cat5e | 100MHz | NO | 3U | YES |
|
||
 |
SYTZT1188IWA17B3HT6387 | SPEC | Cat6 | 250MHz | NO | 3U | NO |
|
||
 |
SYT-US030-015E | SPEC | Cat6 | 250MHz | YES | 6U | NO |
|
||
 |
SYT-PCB003 | SPEC | - | - | YES | 50U | NO |
|
||
 |
WHZT3811EK0042P8111059 | SPEC | Cat3 | 16MHz | YES | 6U | NO |
|
||
 |
SYTZT1188GWC8D3T5E387 | SPEC | Cat5e | 100MHz | YES | 6U | NO |
|
||
 |
SYT5866ZT1188GWA12D3T6387 | SPEC | Cat6 | 250MHz | NO | - | YES |
|
||
 |
SYTZT1188IWA17DY3S2T6387 | SPEC | Cat6 | 250MHz | NO | 3U | YES |
|
||
 |
RJ45-8P8C | SPEC | - | - | YES | - | NO |
|
||
 |
SYT-PCB007 | SPEC | - | - | YES | 6U | NO |
|
||
 |
SYTZT1188GWC9DY3S4T6387 | SPEC | Cat6 | 250MHz | YES | - | YES |
|
||
 |
SYTZT1188GWC9DY3S2T6387 | SPEC | Cat6 | 250MHz | YES | - | YES |
|
||
 |
SYT-US030-026E-L | SPEC | Cat6 | 250MHz | YES | 50U | NO |
|
||
 |
WHS5960 | SPEC | - | - | YES | - | NO |
|
No matching part numbers
Broaden the selected filters or clear the current search.
Product family quick links
Start with Network Level
Counts reflect the current published product data.
How to select
A practical selection sequence
Narrow the published fields in sequence, compare the remaining candidates and verify the part-specific files before design-in.
- 01
Confirm straight-through or special wiring
Specify both interfaces, gender and contact mapping; assess any one-to-two adapter separately.
- 02
Match the cabling category
Choose documented Cat5e or Cat6 candidates for the channel; missing fields are not a pass.
- 03
Choose shielding and mounting
Review shield grounding, panel retention, cutout and cable clearance.
- 04
Validate the channel and request supply
Test at the intended length, data rate and power conditions, then send the part number, quantity and timing for a quote.
Key selection parameters
What each filter helps you decide
Frequency bandwidth
MHz describes frequency, not achieved data rate in Mb/s.
Shielding
Review shield continuity and grounding across the coupler, cables and equipment.
Panel mounting
Check clips/fasteners, cutout, panel thickness and access on both sides.
Contacts and wiring
Verify plating location and units and contact mapping; a one-to-two adapter is not an ordinary inline coupler.
Product family comparison
Compare the published Network Level
Use this summary as a routing step, then verify every required value in the exact part-number row and linked technical files.
Return to the selector ↑Technical performance & application fit
Validate the complete design context
Application suitability is part-number specific. Treat the catalog fields as a shortlist, then confirm the design against the linked technical files.
Equipment panel feedthroughs
- Check panel retention and mating clearance when connecting internal and external cables.
Equipment cable connection and service
- Confirm wiring and category and reassess the complete channel after adding a connection.
Downloads & technical resources
Find files by part number
Search a full or partial SKU, then open its datasheet, 3D model or PCB footprint without returning to the product table.
Showing representative available file sets. Search to find a specific SKU.
- 0
- PDF datasheets listed
- 0
- 3D file sets listed
- 0
- PCB footprints listed
VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.
Category overview
What an inline coupler does to the link
Couplers are simple parts, but two questions come up constantly: whether they slow the link, and which category to use.
Discuss a new design
Contact FAE for a replacement assessment.
Already have a part number? Request samples or a quote.
It joins two runs without re-terminating
A coupler mates two RJ45 plugs back to back, so two existing cable runs become one channel without cutting and re-terminating either end. That is its whole purpose: extending or repairing a run with existing patch leads rather than making up a new cable.
Does it slow the connection
Not in the sense people usually mean. A coupler does not reduce the negotiated link speed. It adds a connection point, which introduces an impedance discontinuity and a small insertion loss. On a short gigabit run that sits inside the margin. Near the length limit, or at 10G, it consumes margin already thin.
Match the category to the channel
The channel performs to its weakest element, so a Cat5e coupler caps a Cat6A channel at Cat5e. Use a coupler at or above the category of the cable and the link. On screened installations, use a shielded coupler so the screen stays continuous through the join, or the shielding is defeated at that point.
FAQ & related guides
Questions before design-in
These answers guide the page workflow. Part-specific engineering limits still come from the linked technical files.
What does Cat7A offer over Cat7?
A higher specified bandwidth, intended for installations that need headroom beyond Cat7. Like Cat7 it relies on individually screened pairs, so the advantage exists only when every connection in the channel maintains that screening through the join.
Is Cat7A worth specifying?
It depends on the requirement. If the installation is planned for bandwidth beyond 10G or for a long service life with future upgrades in mind, the headroom can justify the cost. For a link that will stay at gigabit, a lower category is the proportionate choice.
Does it require special connectors?
Cat7A cable, like Cat7, is associated with connector interfaces beyond standard RJ45 in its original specification, though RJ45 compatible hardware is used in practice. Confirm which interface the installation uses so the coupler matches what is actually terminated.
Will a Cat7A coupler improve an existing link?
Not by itself. The channel performs to its weakest element, so fitting a high category coupler to lower category cable gives no gain. Upgrading a link means upgrading the cable, the connectors and the couplers together, then certifying the result.
How do I request samples or a quote?
With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the cable type, the connector interface used on site and the bandwidth the installation targets.
Engineer support
Continue after product selection
Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.
- 1Selected part numbers
- 2Engineering review
- 3Sample request
- 4Commercial discussion
For a replacement review
- Original part and datasheet
Include the document revision
- Operating conditions
Temperature, isolation voltage and PoE current basis
- Package constraints
Pin count, pitch and spacing between pin rows
- Project stage and annual volume
To help prioritize samples and evaluation
- Target review date
When you need candidates and a comparison of differences
Engineering review identifies candidate parts and explains the differences.
For samples and a quotation
- Candidate part numbers
From the selector or engineering review
- Quantity and project stage
Prototyping / pilot build / production
- Required delivery date
Specify sample and production timing separately
- Required documentation
Compliance documents, material declarations or third-party reports
Samples are free of charge. Sample quantity and lead time depend on the part number and project stage. Sales will respond on business days.
Published replacement reviews
Push-Pull Transformer Selection Comparison: VOOHU WHST06Q02E0 vs. Würth Elektronik 750316819
View all alternatives
