Skip to main content
VOOHU Waterproof RJ45 Male Plugs products

I/O Connector products

Waterproof RJ45 Male Plugs

The male plug assembles onto the cable and mates with a sealed panel socket. The IP67 rating applies to the mated pair, so confirm the socket it mates with and that the cable diameter falls inside the gland range.

Part number search & selector

Find Waterproof RJ45 Male Plugs part numbers

Filter the waterproof RJ45 male plug by dimensions, termination, lock type, mating cycles, contact ratings, temperature and humidity.

* Frozen Image and Part Number columns · drag horizontally to review all specifications

Waterproof RJ45 Male Plugs product selection results
Image Part number Datasheet Compare Downloads Wiring methodDimensions (L×W×H, mm)Installation/welding processLocking deviceNumber of plugging and unplugging (times)Contact rated current (DC)Contact rated voltage (AC)Operating temperatureOperating humidity Sample
VOOHU WHKNZ01000FS Waterproof RJ45 Male Plugs WHKNZ01000FS SPEC Waterproof male connector28×33×34.75Crimping processSpiral Lock10001.5A125V-40 °C~+85 °C20~70%

Series overview

Waterproof RJ45 plug for the cable side

A waterproof RJ45 plug is the cable-side half of a sealed Ethernet connection: WHKNZ01000FS is crimped onto the cable and secured to its socket with a spiral lock. It is also listed as a waterproof RJ45 male plug or waterproof RJ45 male connector. Panel parts in the same locking RJ45 range, such as the 180° straight-through feed-throughs, have their own pages; confirm mating pairs on the drawings.

01

Crimp termination

WHKNZ01000FS is terminated by crimping; plan the tooling with our FAE team and pull-test a few crimped samples before the first run.

02

Spiral lock

The plug has a spiral lock rather than a latch: it is turned to secure it, so leave hand room around the socket.

03

Size and ratings

WHKNZ01000FS measures 28×33×34.75 mm; its contacts are rated 1.5 A DC and 125 V AC, from −40 °C to +85 °C.

04

Mating cycles and seals

The plug is listed for 1,000 mating cycles. Seals wear with use, so inspect them at service intervals too.

Open the Locking RJ45 Connectors selection guide →

Applications

Where a waterproof RJ45 plug is used

It terminates field cables that must plug into a sealed port.

Outdoor

Outdoor network equipment

Outdoor cameras, signs and kiosks need a sealed cable joint at the wall. WHKNZ01000FS can be the outdoor RJ45 plug on the cable side; confirm the mated rating with the socket.

Industrial

Machines on the shop floor

Shop-floor machines face dust, knocks and vibration; a crimped, spiral-locked rugged RJ45 plug holds the link from −40 °C to +85 °C.

Installation

Cables made up on site

Because it is crimped rather than molded on, installers can cut cables to length and fit WHKNZ01000FS as a field installable RJ45 plug.

Downloads & technical resources

Waterproof RJ45 plug datasheet and 3D model

Search WHKNZ01000FS for its datasheet and 3D model, then confirm the mating socket and cable diameter with the drawing.

1
PDF datasheets listed
1
3D file sets listed
0
PCB footprints listed

VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.

Sourcing

Ordering the waterproof RJ45 plug from VOOHU

VOOHU manufactures waterproof RJ45 plugs and other locking RJ45 connectors in its own connector factory in Dongguan. WHKNZ01000FS has a datasheet and 3D model.

01

Samples and quotations

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. Quotes need the quantity, cable type and required date; typical lead time is 7–10 days.

02

Replacing another waterproof plug

To replace another supplier’s waterproof Ethernet plug, send its part number, datasheet and mating socket. Our FAE team compares lock, sealing, size and ratings, and names VOOHU candidates for you to test as samples before production.

03

Quality and customers

VOOHU is ISO 9001 and ISO 14001 certified. Since 2018 VOOHU has supplied more than 1,500 customers, including 150+ listed companies.

FAQ & related guides

Questions about the waterproof RJ45 plug

The manufacturer, how the plug terminates and locks, and the files available.

Does the plug alone provide IP67?

No. The rating applies to the mated and correctly assembled pair, plug into socket, with the gland tightened onto a cable inside its specified diameter range. An unmated plug, or one assembled onto the wrong cable diameter, does not achieve the sealing the rating implies.

What socket does it mate with?

It mates with the sealed panel socket in the waterproof RJ45 range. Confirm the specific mating part from the drawings rather than assuming any waterproof socket will seal against it, because thread form and sealing face vary between designs.

What cable diameter does it accept?

The gland accepts a stated diameter range, given on the drawing. A cable thinner than the range will not seal; one thicker will not assemble. Check the outer diameter of the actual cable, including any jacket variation between batches.

Can it be assembled in the field?

These plugs are designed to be assembled onto a cable rather than supplied overmoulded, so field assembly is possible. Follow the assembly sequence in the instructions, particularly the order of the gland components, because a part assembled out of sequence will not seal.

How do I request samples or a quote?

With a complete part number, send the part number, quantity, delivery region and the date you need it. If you are still selecting, send the cable outer diameter, the mating socket part number and the ingress rating required.

Is VOOHU a waterproof RJ45 plug manufacturer?

Yes. VOOHU manufactures WHKNZ01000FS in its own connector factory in Dongguan, China, alongside the panel-side parts of its locking RJ45 range.

How does WHKNZ01000FS terminate and lock?

It is crimped onto the cable and locks to its socket with a spiral lock, listed for 1,000 mating cycles. Check the drawing for the space the lock needs.

Is a 3D model available for the waterproof RJ45 male connector?

Yes. The datasheet and 3D model for WHKNZ01000FS are in the downloads section. Use the model to check clearance for the spiral lock and the cable bend behind the plug.

Engineer support

Waterproof RJ45 plug samples and FAE help

Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.

  1. 1Selected part numbers
  2. 2Engineering review
  3. 3Sample request
  4. 4Commercial discussion

For a replacement review

  • Original part and datasheet

    Include the document revision

  • Operating conditions

    Temperature, isolation voltage and PoE current basis

  • Package constraints

    Pin count, pitch and spacing between pin rows

  • Project stage and annual volume

    To help prioritize samples and evaluation

  • Target review date

    When you need candidates and a comparison of differences

Engineering review identifies candidate parts and explains the differences.

For samples and a quotation

  • Candidate part numbers

    From the selector or engineering review

  • Quantity and project stage

    Prototyping / pilot build / production

  • Required delivery date

    Specify sample and production timing separately

  • Required documentation

    Compliance documents, material declarations or third-party reports

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project. Sales will respond on business days.

Your information will be used only to respond to this support request.

Parameter comparison

Compare selected part numbers

Differences are presented for review; confirm final values and file revisions in each part-specific datasheet.