System Block Diagram
PoE
Component selection
Solution Overview
The connection between a local area network (LAN) and Power over Ethernet (PoE) follows the structure shown in the figure. Ethernet signals are transmitted to the physical layer chip via a cable, while PoE current is transmitted through the same cable and flows to the DC/DC converter.
Reference Design
-
VOOHU provides comprehensive standard circuit reference design support.
-
If you have any questions, please contact us online.
Standard Circuit Reference
-
PoE Outdoor 6KV Lightning Protection Solution (Solution 1) & Current-Type PHY PDF
-
PoE Outdoor 6KV Lightning Protection Solution (Solution 1) & Voltage-Type PHY PDF
-
PoE Outdoor 6KV Lightning Protection Solution (Solution 2) & Current-Type PHY PDF
-
PoE Outdoor 6KV Lightning Protection Solution (Solution 2) & Voltage-Type PHY PDF
Reference Design
PoE Outdoor 6KV Lightning Protection Solution (Solution 1) & Current-Type PHY
>
PoE Outdoor 6KV Lightning Protection Solution (Solution 1) & Voltage-Type PHY
>
PoE Outdoor 6KV Lightning Protection Solution (Solution 2) & Current-Type PHY
>
PoE Outdoor 6KV Lightning Protection Solution (Solution 2) & Voltage-Type PHY
>
PoE Outdoor 4KV Lightning Protection Solution & Current-Type PHY
>
PoE Outdoor 4KV Lightning Protection Solution & Voltage Type PHY
>
Video
