Pro AV Applications
In professional AV system design, the quickest way to tell whether VOOHU has parts for a device is to look at the cables and ports it uses. Ethernet ports carrying AV over IP, Dante or SMPTE ST 2110 use RJ45 with integrated magnetics (ICM), LAN transformers and RJ45 connectors; HDMI and SDI interfaces use signal line common mode chokes and ESD; RS-485 control links use push-pull transformers. The architecture below runs from sources such as computers, cameras and microphones, through matrix switchers, distributed TX / RX, KVM, video wall processors and mixing consoles, to LED walls, projectors, amplifiers and stage lighting, all managed by a central control host.
Five-layer pro AV system architecture
Sources
Process & Distribute
Transport
Endpoints
Control & Mgmt
Component-level reference designs
Component-level illustrative reference designs compiled by VOOHU FAEs for typical devices. Each illustrative board marks every component position, its function and the VOOHU part numbers available, so you can review selection notes and packages position by position.
What we provide along this chain
AV over IP & Dante Ports
RJ45 with integrated magnetics (ICM), LAN transformers and RJ45 connectors for AV over IP, Dante and LED receiving-card Ethernet ports.
RJ45 with Integrated Magnetics (ICM)Video Interface Protection
Signal line common mode chokes and ESD devices for EMI suppression and static protection on high-speed HDMI and SDI interfaces.
Signal Line CMCSerial Isolation
Push-pull transformers for isolated power on RS-485 / DMX512 control links.
Push-Pull TransformersAudio Magnetics
Audio transformers for the audio paths of mixing consoles, conference systems and amplifiers.
Audio TransformersCan’t find the right part or design?
Tell us about your device and requirements. A VOOHU FAE will help with part selection and come back with recommended part numbers and a quote.
