Skip to main content
VOOHU WHST080 products

Transformer products

WHST080

Find a push-pull transformer for your isolated power design. Compare six series against your input/output requirements, drive conditions and winding arrangement, using part-specific datasheets for selection and sample validation. Already have a part number? Request samples or pricing directly. For a new design, share your requirements. For an existing component, your sales engineer can coordinate an FAE replacement assessment.

Part number search & selector

Find WHST080 part numbers

The table uses the current English-site product records, published selection fields and part-specific technical-file links.

* Frozen Image and Part Number columns · drag horizontally to review all specifications

WHST080 product selection results
Image Part number Datasheet Compare Downloads SeriesL(μH)Turns RatioDCR1(mΩ)DCR2(mΩ)Isolation(VAC)Operating Temperature(℃) Sample
VOOHU WHST06005G0 WHST080 WHST06005G0 SPEC WHST0606803:575012004000-40℃ to 125℃
VOOHU WHST06006G0 WHST080 WHST06006G0 SPEC WHST0605383:875015004000-40℃ to 125℃
VOOHU WHST06007G0 WHST080 WHST06007G0 SPEC WHST0605384:39007504000-40℃ to 125℃
VOOHU WHST06008G0 WHST080 WHST06008G0 SPEC WHST0605388:315007004000-40℃ to 125℃
VOOHU WHST06021G0 WHST080 WHST06021G0 SPEC WHST0605388:975010004000-40℃ to 125℃
VOOHU WHST06010G0 WHST080 WHST06010G0 SPEC WHST0605381:1.775012004000-40℃ to 125℃
VOOHU WHST06D01A0 WHST080 WHST06D01A0 SPEC WHST06D2001:1:3.42378823000-40℃ to 125℃
VOOHU WHST06D02A0 WHST080 WHST06D02A0 SPEC WHST06D1001.2:12502202500-40℃ to 125℃
VOOHU WHST06D03A0 WHST080 WHST06D03A0 SPEC WHST06D5383:84009004000-40℃ to 125℃
VOOHU WHST06D04A0 WHST080 WHST06D04A0 SPEC WHST06D6803:43505204000-40℃ to 125℃
VOOHU WHST06E12A0 WHST080 WHST06E12A0 SPEC WHST06E4751:1.3100010003100-40℃ to 125℃
VOOHU WHST06E16A0 WHST080 WHST06E16A0 SPEC WHST06E4751:1.7100010003100-40℃ to 125℃
VOOHU WHST06E17A0 WHST080 WHST06E17A0 SPEC WHST06E4751:2100010003100-40℃ to 125℃
VOOHU WHST06E18A0 WHST080 WHST06E18A0 SPEC WHST06E4751:1.5100010003100-40℃ to 125℃
VOOHU WHST08802E0 WHST080 WHST08802E0 SPEC WHST0885371:1:0.45:0.456603302100-40℃ to 125℃

How to select

Selection guide for Push-Pull Transformers

Selection steps, parameter explanations and the series comparison for Push-Pull Transformers are on one page. Confirm the series there, then use this list for part numbers, files and samples.

Open the Push-Pull Transformers selection guide →

Downloads & technical resources

Find files by part number

Search a full or partial SKU, then open its datasheet, 3D model or PCB footprint without returning to the product table.

0
PDF datasheets listed
0
3D file sets listed
0
PCB footprints listed

VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.

Engineer support

Continue after product selection

Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.

  1. 1Selected part numbers
  2. 2Engineering review
  3. 3Sample request
  4. 4Commercial discussion

For a replacement review

  • Original part and datasheet

    Include the document revision

  • Operating conditions

    Temperature, isolation voltage and PoE current basis

  • Package constraints

    Pin count, pitch and spacing between pin rows

  • Project stage and annual volume

    To help prioritize samples and evaluation

  • Target review date

    When you need candidates and a comparison of differences

Engineering review identifies candidate parts and explains the differences.

For samples and a quotation

  • Candidate part numbers

    From the selector or engineering review

  • Quantity and project stage

    Prototyping / pilot build / production

  • Required delivery date

    Specify sample and production timing separately

  • Required documentation

    Compliance documents, material declarations or third-party reports

Samples are free of charge. Sample quantity and lead time depend on the part number and project stage. Sales will respond on business days.

Your information will be used only to respond to this support request.

Parameter comparison

Compare selected part numbers

Differences are presented for review; confirm final values and file revisions in each part-specific datasheet.