Front/rear interface
Distinguish female-to-female, female-to-male and pin termination against the wiring drawing.
I/O Connector products
Waterproof RJ45 Connectors
Choose a protected Ethernet interface for your equipment. Compare waterproof RJ45 connectors by panel mounting, orientation, front/rear interface and part-specific ingress rating. Review the required seals and installation drawing, then request samples, pricing or a replacement assessment.
Part number search & selector
Find Waterproof RJ45 Connectors part numbers
The table uses the current English-site product records, published selection fields and part-specific technical-file links.
* Frozen Image and Part Number columns · drag horizontally to review all specifications
| Image | Datasheet | Compare | Downloads |
Docking Type
|
Docking angle
|
Number of pins
|
Conversion Type
|
Installation Type
|
Waterproof grade
|
Panel thickness MAX (mm)
|
Rated voltage (V)
|
Rated current (A)
|
Contact resistance MAX (mΩ)
|
Insulation resistance MIN (MΩ@500V DC)
|
Compressive strength
|
MIN number of plug-in cycles
|
Operating temperature (°C)
|
Sample |
|---|
| Image | Part number | Datasheet | Compare | Downloads | Docking Type | Docking angle | Number of pins | Conversion Type | Installation Type | Waterproof grade | Panel thickness MAX (mm) | Rated voltage (V) | Rated current (A) | Contact resistance MAX (mΩ) | Insulation resistance MIN (MΩ@500V DC) | Compressive strength | MIN number of plug-in cycles | Operating temperature (°C) | Sample |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
WHPMWRJ1085 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | IP65 | 3 | - | - | - | - | - | - | -40℃~85℃ |
|
||
 |
WHZJT020299 | SPEC | Full Teeth | 180° | — | F/F | Panel Type | - | - | 125 | 1.5 | 30 | 500 | 1min@ 500V AC | - | - |
|
||
 |
WHZJT020297 | SPEC | Full Teeth | 180° | — | F/F | Panel Type | - | - | 125 | 1.5 | 30 | 500 | — | - | - |
|
||
 |
WHPMWRJ1127 | SPEC | Full Teeth | 180° | 8P8C | F/F | - | - | - | 300 | - | 5 | 10 | - | - | -40℃~85℃ |
|
||
 |
WHPMWRJ1065 | SPEC | Full Teeth | 180° | 8P8C | F/F | - | - | - | 300 | - | 5 | 10 | - | - | -40℃~85℃ |
|
||
 |
WHPMWRJ1003 | SPEC | Full Teeth | 180° | 8P10C | F/M（Pin） | Panel Type | IP67 | - | - | - | 5 | - | 10ms@300V dc | - | - |
|
||
 |
WHPMWRJ1022 | SPEC | Full Teeth | 180° | 8P8C | F/M（Pin） | Panel Type | - | 4 | - | - | - | - | - | - | - |
|
||
 |
WHPMWRJ3592 | SPEC | Full Teeth | 180° | - | - | - | IP67 | - | - | - | - | - | - | — | -40℃~85℃ |
|
||
 |
WHPMWRJ1049 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | IP67 | 3 | 125 | 1.5 | 30 | 500 | 1min@1000V AC | 750 | -40℃~85℃ |
|
||
 |
WHPMWRJ1102 | SPEC | Full Teeth | 90° | 8P8C | F/F | Panel Type | IP67 | 3 | 125 | 1.5 | 30 | 1000 | 1min@1000V AC | 750 | -40℃~85℃ |
|
||
 |
WHPMWRJ1101 | SPEC | Full Teeth | 90° | 8P8C | F/F | Panel Type | IP67 | 3 | 125 | 1.5 | 30 | 1000 | 1min@1000V AC | 750 | -40℃~85℃ |
|
||
 |
WH14800504A009 | SPEC | Full Teeth | 180° | 8P8C | F/M | - | - | - | - | - | 2000 | 20 | - | - | -30℃~80℃ |
|
||
 |
WH14800504A042 | SPEC | Full Teeth | 180° | 8P8C | F/M（Pin） | Panel Type | IP65 | - | 5 | 1 | 30 | 20 | - | - | -25℃~60℃ |
|
||
 |
WH10800400W024 | SPEC | Full Teeth | 180° | 8P8C | F/F | Panel Type | - | - | - | - | - | - | - | - | - |
|
||
 |
WH10800408F005 | SPEC | Full Teeth | 180° | 8P10C | F/F | Panel Type | - | - | - | - | - | - | - | - | - |
|
||
 |
WHPMWRJ3088 | SPEC | Full Teeth | 180° | 8P8C | F/M | Panel Type | IP67 | 3 | - | - | - | - | - | - | - |
|
No matching part numbers
Broaden the selected filters or clear the current search.
Product family quick links
Start with Docking Type
Counts reflect the current published product data.
How to select
A practical selection sequence
Narrow the published fields in sequence, compare the remaining candidates and verify the part-specific files before design-in.
- 01
Define the interface and location
Specify both interfaces, panel feedthrough needs and service access.
- 02
Check sealing conditions
Check the part-specific IP rating, mating state, seals, protective cap and cable requirements.
- 03
Review drawings and electrical limits
Review cutout, panel thickness, threads, fastening and electrical limits; equal outside diameter does not prove mating compatibility.
- 04
Validate installation and environment
Validate the selected assembly in its intended installation and environment, or request pricing directly for a known part.
Key selection parameters
What each filter helps you decide
Sealing and ingress rating
Check mating state, seals and cap requirements; an empty rating is not confirmation.
Panel and locking structure
Verify cutout, thickness, threads and fastening rather than inferring mating from diameter.
Cable sealing
Where a cable entry is used, check diameter, jacket and assembly requirements.
Electrical limits and durability
Keep contact resistance, insulation resistance, withstand voltage and mating cycles separate, with correct units and conditions.
Product family comparison
Compare the published Docking Type
Use this summary as a routing step, then verify every required value in the exact part-number row and linked technical files.
Return to the selector ↑| Docking Type | Parts | Docking angle | Number of pins | Conversion Type | Installation Type | Waterproof grade | Panel thickness MAX (mm) | Rated voltage (V) | Rated current (A) | Contact resistance MAX (mΩ) | Insulation resistance MIN (MΩ@500V DC) | Compressive strength | MIN number of plug-in cycles | Operating temperature (°C) | Action |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Full Teeth | 16 | 90°, 180° | 8P8C, 8P10C, -, Not specified | F/F, F/M, F/M（Pin）, - | Panel Type, - | IP65, IP67, - | 3, 4, - | 5, 125, 300, - | 1, 1.5, - | 5, 30, 2000, - | 10, 20, 500, 1000, - | 1min@1000V AC, 1min@ 500V AC, 10ms@300V dc, -, Not specified | 750, -, Not specified | -40℃~85℃, -30℃~80℃, -25℃~60℃, - | Filter → |
| - | 1 | 180° | 8P8C | F/F | - | IP67 | - | 125 | 1.5 | 30 | - | 1min@1000V AC | - | - | Filter → |
Technical performance & application fit
Validate the complete design context
Application suitability is part-number specific. Treat the catalog fields as a shortlist, then confirm the design against the linked technical files.
Outdoor equipment cabinets
- Share enclosure material, panel thickness, cable-entry details and exposure requirements to assess the intended assembly.
Industrial equipment service ports
- Specify frequent service mating versus long-term connection and review protection and replacement access when unused.
Downloads & technical resources
Find files by part number
Search a full or partial SKU, then open its datasheet, 3D model or PCB footprint without returning to the product table.
Showing representative available file sets. Search to find a specific SKU.
WHPMWRJ1085Full Teeth
WHZJT020299Full Teeth
WHZJT020297Full Teeth
WHPMWRJ1127Full Teeth
WHPMWRJ1065Full Teeth
WHPMWRJ1003Full Teeth
- 18
- PDF datasheets listed
- 11
- 3D file sets listed
- 0
- PCB footprints listed
VOOHU’s published product content is reviewed by its engineering team. Specifications, downloads and technical support information are tied to specific part numbers, so you can verify them before requesting samples or a quotation.
Category overview
What the waterproof RJ45 range actually contains
Ingress ratings get all the attention, but the first question is which kind of part your enclosure actually needs.
Discuss a new design
Contact FAE for a replacement assessment.
Already have a part number? Request samples or a quote.
More than one kind of part
The range covers panel-mount bulkhead adapters with a full-thread body, female-to-female couplers, RJ45-to-pin-header adapters for internal wiring, sealing caps for unused ports and made-up cable assemblies. These solve different problems, so identify which one the enclosure needs before comparing ratings.
Sealing is a property of the installation
An ingress rating describes the connector correctly mounted, correctly mated and with its gasket seated on a flat panel inside the stated thickness range. An open port, an over-thick panel or a cable outside the gland range each break it. Treat the rating as a property of the installation, not of the part alone.
Check the category and the temperature
Some parts are specified for Cat6 or Cat6A and some carry an industrial temperature range. Both matter: the category caps the link the assembly can support, and the temperature range decides whether the seal material stays serviceable where the equipment is actually installed.
FAQ & related guides
Questions before design-in
These answers guide the page workflow. Part-specific engineering limits still come from the linked technical files.
Under what conditions does an IP67 RJ45 connector provide protection?
The conditions are part-specific. Confirm the required mating plug and fully mated state, correct seal installation, any protective cap for unmated use and the specified panel assembly. The catalog label alone is not enough.
Can IP67 and IP68 be treated as interchangeable?
No. Review the conditions for each rating, especially the immersion requirements. If the project specifies IP68, submit the exposure requirements so that a suitable part can be confirmed.
What panel information is needed for a waterproof bulkhead connector?
Provide the cutout shape and dimensions, panel thickness, seal contact surface, fastening arrangement and clearance on both sides. Use the selected part drawing rather than the front-face diameter alone.
What is a waterproof RJ45 female-to-female coupler used for?
It provides a connection between two RJ45 cable interfaces. Environmental suitability depends on the specified mating parts, sealing and installation. It is not an Ethernet switch or signal converter.
Can any Ethernet cable use the same waterproof connector assembly?
Not necessarily. Where a cable seal or gland is used, verify the permitted cable outside diameter, jacket and assembly requirements. Also check the plug envelope and locking mechanism.
Does a waterproof rating guarantee outdoor or continuous-immersion use?
No. Temperature, UV exposure, salt spray, chemicals and immersion conditions must be assessed separately. Request evidence or an engineering review for the intended environment.
How do I assess replacement between 90° and 180° versions?
Compare the front/rear position, panel cutout and thickness, mounting hardware, cable clearance, wiring and sealing conditions. A change in orientation may alter internal routing.
How do I request waterproof RJ45 samples and volume pricing?
Send the part number, required mating accessories, sample or production quantity, destination and timing. If the part is unknown, share the enclosure drawing and protection requirements for sales engineering and FAE review.
Engineer support
Continue after product selection
Send the candidate part number and the condition you need reviewed. Sample support can be added after the selection is clear; commercial questions may be discussed in the same engineering conversation.
- 1Selected part numbers
- 2Engineering review
- 3Sample request
- 4Commercial discussion
For a replacement review
- Original part and datasheet
Include the document revision
- Operating conditions
Temperature, isolation voltage and PoE current basis
- Package constraints
Pin count, pitch and spacing between pin rows
- Project stage and annual volume
To help prioritize samples and evaluation
- Target review date
When you need candidates and a comparison of differences
Engineering review identifies candidate parts and explains the differences.
For samples and a quotation
- Candidate part numbers
From the selector or engineering review
- Quantity and project stage
Prototyping / pilot build / production
- Required delivery date
Specify sample and production timing separately
- Required documentation
Compliance documents, material declarations or third-party reports
Sample quantity, lead time and cost depend on the project stage and part number. Sales will respond on business days.
Published replacement reviews
Push-Pull Transformer Selection Comparison: VOOHU WHST06Q02E0 vs. Würth Elektronik 750316819
View all alternatives
