WHSG4805N0 100/1000 BASE-T DOUBLE MOUTH 48PIN ETHERNET TRANSFORMER

Homepage / Products

LAN Transformer

WHSG48005N0 Gigabit LAN Transformer

Dual-port 10/100/1000BASE-T LAN transformer (Ethernet transformer): 48-pin SMD, 1500 Vrms isolation, not PoE rated. Operating temperature 0 to +70 °C.

Data rate: 10/100/1000BASE-T
Ports: Dual port
Mounting: SMD
Isolation voltage: 1500 Vrms
PoE: Not PoE rated
Operating temperature: 0 to +70 °C

WHSG48005N0 LAN Transformer perspective view

Product Datasheet Get a Quote or Samples + Add to Inquiry Support 3D Model PCB Layout / Package Contact Us

Quality and compliance

Certificate ISO 9001

Certificate ISO 14001

Test report EU RoHS

Test report REACH

When you click Get a Quote or Samples or Add to Inquiry, part number WHSG48005N0 is filled in automatically.

01Specifications

WHSG48005N0 specifications

Key attributes

ParameterValue

Data rate 10/100/1000BASE-T

Ports Dual port

Operating temperature 0 to +70 °C

PoE Not PoE rated

Mounting SMD

Pins 48

Pitch 1.02 mm

Electrical

ParameterValue

Isolation voltage 1500 Vrms

Values from published data for this part (parameters, FAQ and evaluation report). The datasheet prevails.

WHSG48005N0Need samples, or a value that is not in this table? Ask our FAE team. Get a Quote or Samples + Add to Inquiry

02Applications

Where WHSG48005N0 is used

Switches and routers
Wireless access points
IP cameras
Industrial control devices

Typical application

The transformer isolates the PHY from the cable and couples the TX and RX differential pairs to the RJ45 jack.

Center-tap biasing on the PHY side depends on the PHY type (voltage-mode or current-mode).

Typical application for reference. Follow the PHY vendor's reference design.

Works with

Design notes

01Connect the center taps according to your PHY type.Voltage-mode and current-mode PHYs need different center-tap biasing; a mismatch can break auto-negotiation.Check with your PHY →
02Terminate the line-side center taps with a Bob Smith network.It gives common-mode noise a defined path to chassis ground and helps EMC.
03Add line-side surge protection for outdoor or long-cable ports.Residual surge energy through the transformer can still damage the PHY.Troubleshooting guide →

Reference designs by application:Industrial Control Security Monitoring Data Communication

WHSG48005N0Not sure it fits your PHY and layout? An engineer can check your design. Get a Quote or Samples + Add to Inquiry

03Documents

Datasheet, CAD and reports

Download Center →

WHSG48005N0 Datasheet (PDF)2025-08-18 · This part Download ↓
3D model (STEP)2026-06-23 · This part Download ↓
PCB Layout / Package2025-12-26 · This part Download ↓
LAN Transformer Reliability TestLatest · Product family View →
LAN Transformer EU RoHS ReportLatest · Product family View →
REACH SVHC test reportLatest · Communication electronic components View →

WHSG48005N0Need another file format, or samples to test? Ask our FAE team. Get a Quote or Samples + Add to Inquiry

04Quality

Quality and compliance

DocumentNo.Issued / tested byDateApplies toActions

Certificate Certificate · Company ISO 9001:2015No. 19826Q02503R101 Quality management systemBeijing Xinjiyuan Certification Co., Ltd.Valid 2026-10-17 to 2029-10-16

19826Q02503R101 Beijing Xinjiyuan Certification Co., Ltd. Valid2026-10-17 to 2029-10-16 Company View PDF → Verify → Scope: R&D and sales of precision electronic connectors

Certificate Certificate · Company ISO 14001:2015No. 19826E01323R101 Environmental management systemBeijing Xinjiyuan Certification Co., Ltd.Valid 2026-10-17 to 2029-10-16

19826E01323R101 Beijing Xinjiyuan Certification Co., Ltd. Valid2026-10-17 to 2029-10-16 Company View PDF → Verify → Scope: R&D and sales of precision electronic connectors

Test report Test report · LAN transformers EU RoHSNo. WTH26H06190301C 2011/65/EU and (EU) 2015/863, 10 substancesWaltek Testing Group HCT (Shenzhen) Co., Ltd.Issued 2026-07-31

WTH26H06190301C Waltek Testing Group HCT (Shenzhen) Co., Ltd. Issued2026-07-31 LAN transformers View PDF →

Test report Test report · Communication electronic components REACH SVHCNo. WTH26H06167853C 253 substancesWaltek Testing Group HCT (Shenzhen) Co., Ltd.Issued 2026-07-01

WTH26H06167853C Waltek Testing Group HCT (Shenzhen) Co., Ltd. Issued2026-07-01 Communication electronic components View PDF →

Test report Test report · Product family Reliability test report

— — — Product family View PDF →

ISO certificates cover VOOHU's management systems. RoHS and REACH test reports cover tested samples of each product family.

05Ordering

Ordering and delivery

05.1

Samples

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.

Get a Quote or Samples →

06Compare

Same-series Comparison

Red marks values that differ from this part; data from the published parameters of each part.

Parameter WHSG48005N0This part WHDG48209P G WHSG24301GM

Data rate 10/100/1000BASE-T 10/100/1000BASE-T 10/100/1000BASE-T

Mounting SMD DIP SMD

Ports Dual port Dual port Single port

Pins 48 48 24

Pitch 1.02 mm 2.0 mm 1.27 mm

Operating temperature 0 to +70 °C −40 to +85 °C −40 to +125 °C

Isolation voltage 1500 Vrms 1500 Vrms 1500 Vrms

PoE Not PoE rated PoE+ (up to 720 mA) Not PoE rated

WHSG48005N0Not sure which part in the series fits? Ask our FAE team which one to sample. Get a Quote or Samples + Add to Inquiry

07FAQ

FAQ LAN Transformer: WHSG48005N0

WHAT'S THE DIFFERENCE BETWEEN WHSG 4805N0 AND WHSG 4801G ON THE SAME WELD

The electrical indicators, encapsulation sizes, and foot allocation are all the same, with the difference in the rationale: WHSG 480005N0, each channel draws three magnetic components and WHSG 48001G draws two. 1 of the two feet is the same as `TCT1 ' , 2 feet are the same as `TD1+ ' and the line can be followed. However, the internal structure is different, and the EMC cannot be revalidated only by using the parameter table.

WHAT ARE THE WET SENSITIVITY LEVELS AND WELDING CONDITIONS FOR WHSG 4805N0

MSL level 1, workshop conditions 30 & dig; C/60% RH below, six months in duration. Flow peaks 250 & Deg; C & plusmn; 3 & Deg; C, 20 to 40 seconds within peaks 5 & Deg; C; liquid phase starts at 217 & Deg; C, 60 to 150 seconds. Temperature does not exceed 3 & Deg; C and cooling does not exceed 6 & Deg; C. The MSL 1 level means that WHSG 480005N0 does not need pre-baking treatment before going online, which is to be confirmed at the time of discharge.

WHSG 4805N0 WHAT EQUIPMENT

Fitrware temperature falls in two gigabytes of indoor equipment from 0 & Deg; C to +70 & Deg; C, and PCB is a 48 PIN sticker layout. WHSG4805N0 without PoE, with local power supply for both ports; integer 27.80 & times; 12.20 mm, 7.50 mm Max, 48 welds of 0.10 mm, flowback welding and assembly of supplies. The entire machine shall be replaced by a wide-temperature shift when it is powered below 0 & Deg; C; and by a current-named type when the port is to be connected to the grid.

08Support

Talk to an engineer

01Replace your current partSend the part number you use today. An engineer compares pinout, package and electrical ratings and lists the differences.Start a replacement review → 02Match it to your PHYTell us your PHY. We check center-tap wiring, termination and the matching RJ45 jack.Check my design → 03Link drops, hi-pot or EMC failuresSend the symptoms and test conditions. Get an FAE-reviewed troubleshooting checklist.Start troubleshooting →

REQUEST TYPE

Choose a Request Type and Fill in the Fields

WHSG48005N0

Choose a type, fill in the fields, and leave your contact details. Enter "Not sure" for any unknown parameter.

Part Number *

Quantity *

Target Date *

Additional Notes (optional)

Contact Details

Name *

Company *

Email *

Phone (optional)

Verification Code *

Have attachments? Send datasheets, BOMs, or drawings to voohu@voohu.cn with your name and company, and our engineers will handle them together with this request.

By submitting, you agree that we may contact you about this request. Privacy Policy Prefer not to fill in a form? Call +86 400-1048-018 on weekdays 8:30–18:00 (UTC+8) or email voohu@voohu.cn

VOOHU
Founded in 2018
Suzhou, China
1,500+ customers
FAE support

Connect with Us

13th Floor, Building G, Kaiping Business Center, No. 11666 East Taihu Avenue, Wujiang District, Suzhou City, Jiangsu Province, China

TEL+86 133 5804 1040 (WhatsApp) TEL+86 180 2130 1136 / +86 180 2130 1120

E-MAIL voohu@voohuele.com

WHSG48005N0 Gigabit LAN Transformer