DIN-Rail 24V Industrial Power Supply Reference Design
An illustrative DIN-rail AC-DC industrial power supply design for the 24V supply of PLCs, I/O modules, sensors and actuators in control cabinets: AC 100–240V wide-range input, 120W-class 24V / 5A output, active PFC + LLC resonant conversion with secondary synchronous rectification, isolated RS-485 (Modbus RTU) status communication and a DC OK relay output. This page gives the function, selection notes and available VOOHU parts for 33 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and component positions; click any position to see its selection notes, recommended parts and package. The board view is an illustration neatly arranged by functional zone (not the actual layout): AC input at the bottom left, PFC and LLC main conversion in the top band, 24V output in the rightmost column, and monitoring and RS-485 communication in the bottom middle; the AC input, 24V output, DC OK and RS-485 connectors sit on the bottom edge.
AC 100–240V mains enters at terminal J1, passes the fuse F1, the varistor RV1 (L–N surge absorption), the AC EMI filter LF1 (CMC + X / Y capacitors) and the inrush-limiting NTC RT1, is full-wave rectified by the bridge BD1, and is boosted by the boost PFC (L1 + Q1 / D1, controller U1) to an approx. 400V DC bus stored in the bulk capacitor C1. This whole chain works on the AC mains / high-voltage bus: VOOHU power-line CMCs are rated at 125V max and the MOV is a 65 VDC part, so neither applies and this chain has no VOOHU positions. Values per the actual design.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A AC input · EMI | AC input terminal (L / N / PE) | J1 | — | — | Non-VOOHU |
| 02 | A AC input · EMI | Input fuse | F1 | — | — | Non-VOOHU |
| 03 | A AC input · EMI | Input varistor | RV1 | — | — | Non-VOOHU |
| 04 | A AC input · EMI | AC EMI filter (CMC · X / Y capacitors) | LF1 | — | — | Non-VOOHU |
| 05 | A AC input · EMI | Bridge rectifier · inrush-limiting NTC | BD1 RT1 | — | — | Non-VOOHU |
| 06 | B PFC · LLC main conversion | PFC boost inductor | L1 | — | — | Non-VOOHU |
| 07 | B PFC · LLC main conversion | PFC switch · boost diode | D1 Q1 | — | — | Non-VOOHU |
| 08 | B PFC · LLC main conversion | PFC controller | U1 | — | — | Non-VOOHU |
| 09 | B PFC · LLC main conversion | Bulk electrolytic capacitor | C1 | — | — | Non-VOOHU |
| 10 | B PFC · LLC main conversion | LLC resonant controller (with half-bridge driver) | U2 | — | — | Non-VOOHU |
| 11 | B PFC · LLC main conversion | LLC half-bridge MOSFETs | Q2 Q3 | — | — | Non-VOOHU |
| 12 | B PFC · LLC main conversion | Resonant current sensing current transformer | CT1 | Current Transformers | WHPT-EP070-022 | VOOHU |
| 13 | B PFC · LLC main conversion | Resonant inductor · resonant capacitor | LR1 CR1 | — | — | Non-VOOHU |
| 14 | B PFC · LLC main conversion | LLC main transformer | T1 | — | — | Non-VOOHU |
| 15 | B PFC · LLC main conversion | Standby auxiliary supply (flyback) | T2 U3 | — | — | Non-VOOHU |
| 16 | C 24V output | Synchronous rectifier MOSFETs · SR controller | Q4 Q5 U5 | — | — | Non-VOOHU |
| 17 | C 24V output | Regulation feedback (reference · optocoupler · adjustment pot) | U4 | — | — | Non-VOOHU |
| 18 | C 24V output | Output electrolytic capacitors | C2 | — | — | Non-VOOHU |
| 19 | C 24V output | 24V output common-mode choke | L2 | Power Line CMC | WHAL-1513A-301T0 | VOOHU |
| 20 | C 24V output | Output TVS | D2 | TVS / ESD | WHTB058VA | VOOHU |
| 21 | C 24V output | 24V output terminal (+V / −V) | J2 | — | — | Non-VOOHU |
| 22 | D Monitoring · Aux power | Monitoring MCU | U6 | — | — | Non-VOOHU |
| 23 | D Monitoring · Aux power | Auxiliary buck (24V→3.3V) | U7 | — | — | Non-VOOHU |
| 24 | D Monitoring · Aux power | Auxiliary buck molded inductor | L3 | Molded Inductors | WHYT0630 Series | VOOHU |
| 25 | D Monitoring · Aux power | DC OK relay | K1 | — | — | Non-VOOHU |
| 26 | D Monitoring · Aux power | DC OK signal terminal | J5 | — | — | Non-VOOHU |
| 27 | E RS-485 communication | RS-485 RJ45 ports ×2 (daisy-chain in / out) | J3 J4 | RJ45 Connectors | WH56A3188C011101 | VOOHU |
| 28 | E RS-485 communication | Gas discharge tube (primary) | G1 | GDT | WHGD200V1P0B | VOOHU |
| 29 | E RS-485 communication | Bus TVS (secondary clamp) | D3 | TVS / ESD | WHALD30E2B | VOOHU |
| 30 | E RS-485 communication | Bus differential-line CMC | L4 | Signal Line CMC | WHAC-4532A-601ZP0 | VOOHU |
| 31 | E RS-485 communication | Isolated RS-485 transceiver | U8 | — | — | Non-VOOHU |
| 32 | E RS-485 communication | Push-pull isolated power transformer | T3 | Push-Pull Transformers | WHST06K14A0 | VOOHU |
| 33 | E RS-485 communication | Push-pull driver | U9 | — | — | Non-VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 33 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the full industrial power supply reference design packagefull package
Includes the BOM, datasheets for the recommended VOOHU parts and position-by-position selection notes. For selection advice tailored to your power rating, output voltage or communication interface, please include it in your requirements. We reply within 24 hours on working days.