Industrial 5G CPE Reference Design
An illustrative industrial 5G CPE design for remote access to field equipment, unattended sites and mobile machinery: M.2 5G module + Nano SIM for the cellular uplink, dual-band Wi-Fi 6 integrated in the host SoC, one Gigabit WAN port (IEEE 802.3at PoE powered), four Gigabit LAN ports via a switch IC, isolated RS-485 (Modbus pass-through), and dual power input from a DC 24V terminal or PoE. This page covers the function, selection notes and available VOOHU parts for 34 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and component positions; click any position to see selection notes, recommended parts and packages. The board is an illustrative arrangement by functional area (not an actual layout); the RS-485 terminal, LAN / WAN ports and 24V terminal sit on the bottom edge, and the 5G module and antennas are external nodes.
Isolated RS-485 (Modbus RTU pass-through): the line from terminal J1 is first discharged to chassis ground by VOOHU GDT G1 (stage 1), clamped by bidirectional ESD D1 (WHALD30E2B, stage 2), and passes signal-line CMC L1 into the isolated RS-485 transceiver U1; the isolated side of U1 is supplied by the push-pull isolated supply (ISO 5V) and the host side connects to the SoC UART. Termination and bias resistor values per actual design.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A RS-485 · Isolated Power | RS-485 terminal | J1 | — | — | Non-VOOHU |
| 02 | A RS-485 · Isolated Power | Gas discharge tube (stage 1) | G1 | GDT | WHGD200V1P0B | VOOHU |
| 03 | A RS-485 · Isolated Power | Bus TVS (stage-2 clamp) | D1 | TVS / ESD | WHALD30E2B | VOOHU |
| 04 | A RS-485 · Isolated Power | Bus differential-line common-mode choke | L1 | Signal Line CMC | WHAC-4532A-601ZP0 | VOOHU |
| 05 | A RS-485 · Isolated Power | Isolated RS-485 transceiver | U1 | — | — | Non-VOOHU |
| 06 | A RS-485 · Isolated Power | Push-pull isolated power transformer | T1 | Push-Pull Transformers | WHST06K14A0 | VOOHU |
| 07 | A RS-485 · Isolated Power | Push-pull driver + isolated-side LDO | U2 U3 | — | — | Non-VOOHU |
| 08 | B Gigabit LAN ×4 | Dual-port RJ45 with integrated magnetics ×2 (LAN1–4) | J2 J3 | RJ45 with Integrated Magnetics | SYT112Q066AB2A1D | VOOHU |
| 09 | B Gigabit LAN ×4 | Ethernet ESD arrays ×8 (LAN) | D2 D3 D4 D5 D6 D7 D8 D9 | TVS / ESD | WHALD03G4U | VOOHU |
| 10 | B Gigabit LAN ×4 | Gigabit Ethernet switch IC | U4 | Ethernet Switch ICs | JL6107S-PI | VOOHU |
| 11 | B Gigabit LAN ×4 | Switch 25MHz crystal | Y1 | — | — | Non-VOOHU |
| 12 | C WAN · PoE PD | RJ45 port (WAN / PoE PD) | J4 | RJ45 Connectors | SYT561188AB1A1DB4 | VOOHU |
| 13 | C WAN · PoE PD | Gigabit PoE+ LAN transformer | T2 | Gigabit LAN Transformers | WHSG24706-1PTG | VOOHU |
| 14 | C WAN · PoE PD | Ethernet ESD arrays ×2 (WAN) | D10 D11 | TVS / ESD | WHALD03G4U | VOOHU |
| 15 | C WAN · PoE PD | Gigabit PHY (RGMII) | U5 | Ethernet PHY | JL2101C-NI | VOOHU |
| 16 | C WAN · PoE PD | PHY 25MHz crystal | Y2 | — | — | Non-VOOHU |
| 17 | C WAN · PoE PD | PoE bridge rectifier + PD controller | U6 BR1 | — | — | Non-VOOHU |
| 18 | C WAN · PoE PD | PoE input TVS | D12 | TVS / ESD | WHTB058VA | VOOHU |
| 19 | C WAN · PoE PD | PoE flyback transformer | T3 | PoE Power Transformers | WHEP13779 | VOOHU |
| 20 | D Core · Wireless | 5G CPE host SoC (integrated Wi-Fi 6) | U7 | — | — | Non-VOOHU |
| 21 | D Core · Wireless | DDR memory | U8 | — | — | Non-VOOHU |
| 22 | D Core · Wireless | SPI NAND / eMMC storage | U9 | — | — | Non-VOOHU |
| 23 | D Core · Wireless | MCU crystal | Y3 | — | — | Non-VOOHU |
| 24 | D Core · Wireless | Wi-Fi 6 RF front-end (FEM) | U10 | — | — | Non-VOOHU |
| 25 | D Core · Wireless | 5G module M.2 socket | J6 | — | — | Non-VOOHU |
| 26 | D Core · Wireless | Nano SIM socket | J7 | — | — | Non-VOOHU |
| 27 | D Core · Wireless | SIM card ESD array | D13 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 28 | D Core · Wireless | Core supply filter molded inductor ×2 | L2 L3 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 29 | E Power | DC 24V input terminal | J8 | — | — | Non-VOOHU |
| 30 | E Power | Input fuse + TVS | F1 D14 | TVS / ESD | WHTB058VA | VOOHU |
| 31 | E Power | Power line common-mode choke (EMI) | L4 | Power Line CMC | WHAL-7060A-102T0 | VOOHU |
| 32 | E Power | Dual power OR-ing (ideal diode) | D15 | — | — | Non-VOOHU |
| 33 | E Power | Synchronous buck ×2 (→3.8V / 3.3V) | U11 U12 | — | — | Non-VOOHU |
| 34 | E Power | DC-DC molded inductor ×2 | L5 L6 | Molded Inductors | WHYT1030 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 34 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the full Industrial 5G CPE reference design packagefull package
Includes the BOM, datasheets of the recommended VOOHU parts and position-by-position selection notes. If you need advice for your port count, PoE power class or field protection requirements, please describe them in the request. We reply within 24 hours on working days.