DIN-Rail Industrial Edge Gateway Reference Design
An illustrative DIN-rail industrial edge gateway design for production-line data acquisition, equipment networking and remote maintenance: DC 24V input, dual Gigabit Ethernet ports (WAN / LAN), 2 isolated RS-485 and 1 isolated CAN channels for field-device acquisition (protocol conversion such as Modbus RTU / TCP), a Mini PCIe 4G module for wireless uplink, a USB Host port for configuration import and firmware upgrades, and an SoC running Linux for edge computing and cloud connectivity. This page covers the function, selection notes and available VOOHU part numbers for all 29 positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and BOM positions; click any position to view selection notes, recommended parts and package. The board is an illustration arranged by functional zone (not the actual layout); Ethernet ports, bus terminals, the USB port, SIM holder and power terminal sit on the bottom edge, the 4G module plugs into a Mini PCIe socket, and field devices and the upstream network are external nodes.
The WAN and LAN ports are identical, and the 4 Gigabit pairs (A / B / C / D) are also identical, so only 1 port and 1 pair are drawn. The dual RJ45 J1 (no magnetics) feeds VOOHU Gigabit LAN transformers T1 / T2 (WHSG24301GM, 1500 Vrms isolation; WHSG24R03D0 with 3000 Vrms where higher isolation is needed); on the PHY side the 8 differential lines are clamped by two 4-line ESD arrays per port (D1–D4 in total) before the JL2101C Gigabit PHY, which connects to one of the two host MACs via RGMII. Center-tap connection, termination and crystal load capacitor values per the PHY datasheet.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A Ethernet WAN / LAN | Dual RJ45 (1 × 2, with LEDs, WAN / LAN) | J1 | RJ45 Connectors | SYT561288AB2A3DY1027 | VOOHU |
| 02 | A Ethernet WAN / LAN | Gigabit LAN Transformer ×2 | T1 T2 | Gigabit LAN Transformers | WHSG24301GM | VOOHU |
| 03 | A Ethernet WAN / LAN | Ethernet ESD Array ×4 | D1 D2 D3 D4 | TVS / ESD | WHALD03G4U | VOOHU |
| 04 | A Ethernet WAN / LAN | Gigabit PHY ×2 (RGMII) | U1 U2 | Ethernet PHY | JL2101C-NI | VOOHU |
| 05 | A Ethernet WAN / LAN | PHY 25MHz crystal ×2 | Y1 Y2 | — | — | Non-VOOHU |
| 06 | B Fieldbus | Bus terminals (485-1 / 485-2 / CAN) | J2 J3 J4 | — | — | Non-VOOHU |
| 07 | B Fieldbus | Gas discharge tube (stage 1) | GDT1 GDT2 GDT3 | GDT | WHGD200V1P0B | VOOHU |
| 08 | B Fieldbus | Bus TVS (stage-2 clamp) | D5 D6 D7 | TVS / ESD | WHALD30E2B | VOOHU |
| 09 | B Fieldbus | Bus differential-line common-mode choke | L1 L2 L3 | Signal Line CMC | WHAC-4532A-601ZP0 | VOOHU |
| 10 | B Fieldbus | Isolated RS-485 transceiver ×2 | U3 U4 | — | — | Non-VOOHU |
| 11 | B Fieldbus | Isolated CAN transceiver | U5 | — | — | Non-VOOHU |
| 12 | C 4G · USB | 4G Module + Mini PCIe Socket | J5 U6 | — | — | Non-VOOHU |
| 13 | C 4G · USB | SIM holder | J6 | — | — | Non-VOOHU |
| 14 | C 4G · USB | SIM Card ESD Array | D8 | TVS / ESD | WHALD03G4U | VOOHU |
| 15 | C 4G · USB | USB 2.0 Type-A receptacle (Host) | J7 | — | — | Non-VOOHU |
| 16 | C 4G · USB | USB ESD array | D9 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 17 | C 4G · USB | USB signal line common-mode choke | L4 | Signal Line CMC | WHAC-2012A-900T0 | VOOHU |
| 18 | D Core | Host Processor (SoC) | U7 | — | — | Non-VOOHU |
| 19 | D Core | DDR memory | U8 | — | — | Non-VOOHU |
| 20 | D Core | eMMC storage | U9 | — | — | Non-VOOHU |
| 21 | D Core | Main crystal + RTC crystal | Y3 Y4 | — | — | Non-VOOHU |
| 22 | D Core | Core supply filter molded inductor ×2 | L5 L6 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 23 | E Power | DC 24V input terminal | J8 | — | — | Non-VOOHU |
| 24 | E Power | Input fuse + TVS | F1 D10 | TVS / ESD | WHTB058VA | VOOHU |
| 25 | E Power | Power line common-mode choke (EMI) | L7 | Power Line CMC | WHAL-7060A-102T0 | VOOHU |
| 26 | E Power | Synchronous Buck ×3 (5V / 3.3V / 4G 3.8V) | U10 U11 U12 | — | — | Non-VOOHU |
| 27 | E Power | DC-DC molded inductor ×3 | L8 L9 L10 | Molded Inductors | WHYT0630 Series | VOOHU |
| 28 | E Power | Push-pull isolated power transformer | T3 | Push-Pull Transformers | WHST06K14A0 | VOOHU |
| 29 | E Power | Push-pull driver + isolated-side LDO | U13 U14 | — | — | Non-VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 29 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the Full Industrial Gateway Reference Design Packagefull package
Includes the BOM, datasheets for recommended VOOHU parts and per-position selection notes. If you need selection advice for your port speed, number of bus channels or isolation requirements, please describe them in the request. We reply within 24 hours on working days.