Industrial Core Switch Reference Design
An illustrative rack-mount Layer 3 industrial core switch design for the plant-floor management layer and production-line aggregation: 24 Gigabit copper ports (three octal Gigabit PHYs connected to the switch chip over QSGMII) plus 4 × 10G SFP+ uplinks, a Layer 3 switch chip with a management CPU, a Gigabit out-of-band management port and an RJ45 console port, and dual redundant DC 24 ~ 48V power inputs. This page gives the function, selection notes and available VOOHU part numbers for 26 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and component positions; click any position to view its selection notes, recommended parts and package. The board is an illustration arranged by functional zone (not the actual layout); the 24 Gigabit copper ports, 4 SFP+ optical ports, management / console ports and dual power terminals sit along the bottom edge, with the switch chip and management CPU in the top core zone.
The 24 Gigabit copper ports come from three octal Gigabit PHYs (JL2308-PI, 8 ports each), which connect to the Layer 3 switch chip SerDes over QSGMII. The 4 differential pairs of each port are isolated by VOOHU quad-port LAN transformers T1–T6 (WHDG72K01TG, 4 ports each) and then go to 2×4 stacked RJ45 jacks (no integrated magnetics). Only 1 port and 1 differential pair are drawn; the rest are identical. Center taps, Bob Smith termination and crystal load capacitors per the PHY datasheet and the actual design.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A GbE copper ×24 | 2×4 stacked RJ45 ×3 (GbE ports 1–24) | J1 J2 J3 | RJ45 Connectors | WH59C34881111101 | VOOHU |
| 02 | A GbE copper ×24 | Gigabit quad-port LAN transformer ×6 | T1 T2 T3 T4 T5 T6 | Gigabit LAN Transformers | WHDG72K01TG | VOOHU |
| 03 | A GbE copper ×24 | Octal Gigabit PHY ×3 (QSGMII) | U1 U2 U3 | Ethernet PHY | JL2308-PI | VOOHU |
| 04 | A GbE copper ×24 | PHY 25MHz reference clock | Y1 | — | — | Non-VOOHU |
| 05 | B 10G SFP+ uplinks | SFP+ 1×4 cage + 20-pin connector ×4 | J4 J5 J6 J7 | SFP Cage / SFP Connectors | WH81-114-Y0017-1 | VOOHU |
| 06 | B 10G SFP+ uplinks | SFP+ supply filter molded inductor ×4 | L1 L2 L3 L4 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 07 | C Mgmt · Console | Out-of-band management RJ45 | J8 | RJ45 Connectors | SYT561188AB1A1DB4 | VOOHU |
| 08 | C Mgmt · Console | Mgmt port Gigabit LAN transformer | T7 | Gigabit LAN Transformers | WHSG24002TG | VOOHU |
| 09 | C Mgmt · Console | Mgmt port Ethernet ESD array ×2 | D1 D2 | TVS / ESD | WHALD03G4U | VOOHU |
| 10 | C Mgmt · Console | Mgmt port Gigabit PHY (RGMII) | U4 | Ethernet PHY | JL2101C-NI | VOOHU |
| 11 | C Mgmt · Console | Console RJ45 | J9 | RJ45 Connectors | WH56A3188C011101 | VOOHU |
| 12 | C Mgmt · Console | Console ESD | D3 | TVS / ESD | WHALD30E2B | VOOHU |
| 13 | C Mgmt · Console | RS-232 transceiver | U5 | — | — | Non-VOOHU |
| 14 | D Core | Layer 3 switch chip (24 × GE + 4 × 10GE) | U6 | — | — | Non-VOOHU |
| 15 | D Core | Management CPU | U7 | — | — | Non-VOOHU |
| 16 | D Core | DDR memory | U8 | — | — | Non-VOOHU |
| 17 | D Core | Firmware Flash | U9 | — | — | Non-VOOHU |
| 18 | D Core | Switch chip system clock | Y2 | — | — | Non-VOOHU |
| 19 | D Core | Core supply filter molded inductor ×2 | L5 L6 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 20 | E Dual redundant power | Dual DC power input terminals | J10 J11 | — | — | Non-VOOHU |
| 21 | E Dual redundant power | Input TVS ×2 | D4 D5 | TVS / ESD | WHTB058VA | VOOHU |
| 22 | E Dual redundant power | Power line CMC ×2 (EMI) | L7 L8 | Power Line CMC | WHAL-9070A-301T0 | VOOHU |
| 23 | E Dual redundant power | Ideal-diode ORing | U10 | — | — | Non-VOOHU |
| 24 | E Dual redundant power | Intermediate bus buck (→ 12V) | U11 | — | — | Non-VOOHU |
| 25 | E Dual redundant power | Multi-rail synchronous buck ×2 (switch core / 3.3V) | U12 U13 | — | — | Non-VOOHU |
| 26 | E Dual redundant power | DC-DC molded inductor ×3 | L9 L10 L11 | Molded Inductors | WHYT1030 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 26 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the full Industrial Core Switch reference design packagefull package
Includes the BOM, datasheets for the recommended VOOHU parts and position-by-position selection notes. If you need advice for your port count, uplink speed or power scheme, describe it in your requirements. We reply within 24 hours on working days.