Meeting Room Commercial Mini PC Mainboard Reference Design
Illustrative design of a commercial mini PC mainboard for the signal-source layer of professional video systems in meeting rooms and command / control rooms: DC 19V supply, x86 processor (integrated graphics) with on-board DDR memory and an M.2 NVMe SSD; dual Gigabit Ethernet ports (two PCIe Gigabit Ethernet controllers + 1 × 2 RJ45 with integrated magnetics), LAN1 to the office network and LAN2 to the AV over IP / Dante AV network; three display outputs (HDMI ×2 and Type-C with DP Alt Mode), dual-deck USB 3.0, 3.5 mm audio line output (optional audio isolation transformers) and a DB9 RS-232 control-system port. This page lists the function, selection notes and available VOOHU part numbers for all 35 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and component positions; click any position to see selection notes, recommended parts and package. The board is an illustration arranged neatly by functional area (not the actual layout); the Ethernet ports, HDMI, USB / Type-C, audio, DB9 and power jack sit on the bottom edge, the processor, memory and M.2 socket sit in the core area, and displays, the control system, amplifiers and network switches are external nodes.
LAN1 (office network) and LAN2 (AV over IP / Dante AV network) are identical, so only 1 port and 1 differential pair are drawn (Gigabit uses 4 identical pairs, MDI0–MDI3). J1 is a VOOHU 1 × 2 Gigabit RJ45 with integrated magnetics (SYT112Q066AB2A1D); the isolation transformers and common-mode chokes are inside the connector. On the controller side the lines are clamped by 4-line ESD arrays D1–D4 (WHALD03G4U, 2 per port) and go to the MDI pins of Gigabit Ethernet controllers U1 / U2; each controller connects to the x86 processor over its own PCIe lane, and crystals Y1 / Y2 provide the 25MHz reference clock. The two ports sit on separate NICs, so the office network and the AV network can be configured independently without bridging. Centre-tap connection, termination and crystal load capacitors follow the Ethernet controller and SYT112Q066AB2A1D datasheets.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A Dual GbE | RJ45 dual port (integrated magnetics, LAN1 office / LAN2 AV network) | J1 | Ethernet Connectors (RJ45/RJ11) | SYT112Q066AB2A1D | VOOHU |
| 02 | A Dual GbE | Ethernet ESD arrays ×4 | D1 D2 D3 D4 | TVS / ESD | WHALD03G4U | VOOHU |
| 03 | A Dual GbE | Gigabit Ethernet controller ×2 (PCIe) | U1 U2 | — | — | Non-VOOHU |
| 04 | A Dual GbE | Ethernet controller 25MHz crystal ×2 | Y1 Y2 | — | — | Non-VOOHU |
| 05 | B HDMI outputs | HDMI output connector ×2 | J2 J3 | — | — | Non-VOOHU |
| 06 | B HDMI outputs | HDMI TMDS ESD array ×4 | D5 D6 D7 D8 | TVS / ESD | WHALD03G4U | VOOHU |
| 07 | B HDMI outputs | HDMI DDC / HPD / CEC ESD ×2 | D9 D10 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 08 | B HDMI outputs | HDMI level shifter / retimer ×2 | U3 U4 | — | — | Non-VOOHU |
| 09 | C USB · Type-C | USB 3.0 Type-A receptacle (stacked, 2 ports) | J4 | — | — | Non-VOOHU |
| 10 | C USB · Type-C | USB 3.0 SuperSpeed ESD ×2 | D11 D12 | TVS / ESD | WHALD03G4U | VOOHU |
| 11 | C USB · Type-C | USB 2.0 D+ / D− ESD ×2 | D13 D14 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 12 | C USB · Type-C | USB 2.0 signal-line CMCs ×2 | L1 L2 | Signal Line CMC | WHAC-2012A-900T0 | VOOHU |
| 13 | C USB · Type-C | USB Type-C connector (USB 3.2 · DP Alt Mode) | J5 | — | — | Non-VOOHU |
| 14 | C USB · Type-C | Type-C high-speed ESD ×2 | D15 D16 | TVS / ESD | WHALD03G4U | VOOHU |
| 15 | C USB · Type-C | Type-C PD controller · high-speed mux | U5 | — | — | Non-VOOHU |
| 16 | D Audio · Serial | 3.5 mm audio line-out jack | J6 | — | — | Non-VOOHU |
| 17 | D Audio · Serial | Audio line ESD | D17 | TVS / ESD | WHALD30E2B | VOOHU |
| 18 | D Audio · Serial | Line-out audio isolation transformer ×2 (L / R) | T1 T2 | Audio Transformer | WHTT6010 | VOOHU |
| 19 | D Audio · Serial | Audio codec (HD Audio) | U6 | — | — | Non-VOOHU |
| 20 | D Audio · Serial | DB9 female (RS-232 control-system port) | J7 | D-SUB Connectors | WHB050XX6X1ADB2 | VOOHU |
| 21 | D Audio · Serial | RS-232 line ESD | D18 | TVS / ESD | WHALD30E2B | VOOHU |
| 22 | D Audio · Serial | RS-232 transceiver | U7 | — | — | Non-VOOHU |
| 23 | E Processor core | x86 processor (integrated graphics) | U8 | — | — | Non-VOOHU |
| 24 | E Processor core | On-board DDR memory ×2 | U9 U10 | — | — | Non-VOOHU |
| 25 | E Processor core | M.2 M-Key socket (NVMe SSD) | J8 | — | — | Non-VOOHU |
| 26 | E Processor core | Main clock crystal + RTC crystal | Y3 Y4 | — | — | Non-VOOHU |
| 27 | E Processor core | SPI Flash (BIOS) | U11 | — | — | Non-VOOHU |
| 28 | F 19V power | DC 19V power jack | J9 | — | — | Non-VOOHU |
| 29 | F 19V power | Input fuse + TVS | F1 D19 | — | — | Non-VOOHU |
| 30 | F 19V power | Reverse polarity · soft start | Q1 | — | — | Non-VOOHU |
| 31 | F 19V power | Power line common-mode choke (EMI) | L3 | Power Line CMC | WHAL-9070A-301T0 | VOOHU |
| 32 | F 19V power | Processor multiphase VR (controller + DrMOS ×2) | U12 U13 U14 | — | — | Non-VOOHU |
| 33 | F 19V power | Processor VR molded inductor ×2 | L4 L5 | Molded Inductors | WHYT1030 Series | VOOHU |
| 34 | F 19V power | Synchronous buck ×2 (19V→5V, 5V→3.3V) | U15 U16 | — | — | Non-VOOHU |
| 35 | F 19V power | DC-DC molded inductor ×2 | L6 L7 | Molded Inductors | WHYT0630 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 35 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the full Meeting Room Mini PC reference design packagefull package
Includes the BOM, datasheets of the recommended VOOHU parts and position-by-position selection notes. If you need selection advice for your number of Ethernet ports, display interface configuration, serial / audio interfaces or power supply, please describe it in your requirements. We reply within 24 hours on working days.