PTZ Conference Camera Mainboard Reference Design
Illustrative design of the main board of a PTZ conference camera for meeting rooms, distance learning and live streaming: Gigabit Ethernet carries the IP stream (RTSP / RTMP / NDI etc., depending on SoC capability and licensing) and the same cable delivers IEEE 802.3at (PoE+) power, with a DC 12V backup input as an alternative; the video SoC connects to an integrated zoom camera module and outputs video over HDMI to a display / video switcher and over USB 3.0 (UVC) to the meeting PC; RS-232 / RS-485 connect VISCA control keyboards and central control systems, the audio line input reaches the codec through an isolation transformer, and two stepper motors drive pan and tilt. This page covers 35 component positions with their functions, selection notes and the VOOHU part numbers available.
Illustrative PCB ⇄ Schematic
The illustrative layout shows the placement and component positions; click any position to see selection notes, recommended parts and package. The board is an illustration arranged by functional zone (not the actual layout) and shows only the conference camera main board; the RJ45 port, HDMI, USB 3.0, control / audio connectors and DC jack sit on the bottom edge, and the integrated zoom camera module and pan / tilt motors connect through internal connectors at the top as external nodes.
The 4 Gigabit Ethernet pairs are identical; only 1 pair is drawn. RJ45 J1 is a plain RJ45 without magnetics, coupled through the discrete Gigabit PoE+ LAN transformer T1 (WHSG24706-1PTG, PoE+ ≤ 720 mA); the PHY-side pairs are clamped by ESD arrays D1 / D2 (WHALD03G4U) and connect to the Gigabit PHY U1 (JL2101C-NI), which connects to the video SoC over RGMII and carries the IP stream (RTSP / RTMP / NDI etc.) and web / protocol control. The T1 line-side center taps bring PoE+ power to the bridge rectifier (see the PoE+ PD chain). Center-tap termination and crystal load capacitor values per the PHY datasheet.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A Gigabit Ethernet | RJ45 port (Gigabit · PoE+ powered) | J1 | RJ45 Connectors | SYT561188AB1A1DB4 | VOOHU |
| 02 | A Gigabit Ethernet | Gigabit PoE+ LAN transformer | T1 | Gigabit LAN Transformers | WHSG24706-1PTG | VOOHU |
| 03 | A Gigabit Ethernet | Ethernet ESD array ×2 | D1 D2 | TVS / ESD | WHALD03G4U | VOOHU |
| 04 | A Gigabit Ethernet | Gigabit PHY (RGMII) | U1 | Ethernet PHY | JL2101C-NI | VOOHU |
| 05 | A Gigabit Ethernet | PHY 25MHz crystal | Y1 | — | — | Non-VOOHU |
| 06 | B PoE+ PD | PoE input bridge rectifier | D3 | — | — | Non-VOOHU |
| 07 | B PoE+ PD | PD input TVS | D4 | TVS / ESD | WHTB058VA | VOOHU |
| 08 | B PoE+ PD | PoE+ PD controller + flyback PWM | U2 | — | — | Non-VOOHU |
| 09 | B PoE+ PD | PoE flyback transformer | T2 | PoE Power Transformers | WH13P-12H5 | VOOHU |
| 10 | B PoE+ PD | Secondary synchronous rectifier | U3 | — | — | Non-VOOHU |
| 11 | C HDMI · USB | Video output connectors (HDMI / USB 3.0) | J2 J3 | — | — | Non-VOOHU |
| 12 | C HDMI · USB | HDMI TMDS ESD array ×2 | D5 D6 | TVS / ESD | WHALD03G4U | VOOHU |
| 13 | C HDMI · USB | HDMI DDC / HPD / CEC ESD | D7 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 14 | C HDMI · USB | USB 3.0 SuperSpeed ESD | D8 | TVS / ESD | WHALD03G4U | VOOHU |
| 15 | C HDMI · USB | USB 2.0 D+ / D− ESD | D9 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 16 | C HDMI · USB | USB 2.0 signal line common mode choke | L1 | Signal Line CMC | WHAC-2012A-900T0 | VOOHU |
| 17 | D Control · Audio | Control / audio connectors (Mini-DIN · terminal · 3.5mm) | J4 J5 J6 | — | — | Non-VOOHU |
| 18 | D Control · Audio | RS-232 line ESD | D10 | TVS / ESD | WHALD30E2B | VOOHU |
| 19 | D Control · Audio | RS-232 transceiver (VISCA) | U4 | — | — | Non-VOOHU |
| 20 | D Control · Audio | RS-485 bus ESD | D11 | TVS / ESD | WHALD30E2B | VOOHU |
| 21 | D Control · Audio | RS-485 differential-line common mode choke | L2 | Signal Line CMC | WHAC-4532A-601ZP0 | VOOHU |
| 22 | D Control · Audio | RS-485 transceiver (VISCA / PELCO) | U5 | — | — | Non-VOOHU |
| 23 | D Control · Audio | Audio line input isolation transformer | T3 | Audio Transformer | WHTT4001 | VOOHU |
| 24 | D Control · Audio | Audio codec | U6 | — | — | Non-VOOHU |
| 25 | E Core · PTZ | Camera-module connector (zoom lens + image sensor) | J7 | — | — | Non-VOOHU |
| 26 | E Core · PTZ | Video SoC (ISP + encoding + HDMI / USB 3.0) | U7 | — | — | Non-VOOHU |
| 27 | E Core · PTZ | DDR memory + eMMC storage | U8 U9 | — | — | Non-VOOHU |
| 28 | E Core · PTZ | SoC main crystal | Y2 | — | — | Non-VOOHU |
| 29 | E Core · PTZ | Pan / tilt stepper motor driver ×2 | U10 U11 | — | — | Non-VOOHU |
| 30 | E Core · PTZ | Pan / tilt motor & home-Hall connector | J8 | — | — | Non-VOOHU |
| 31 | F Power | DC 12V backup power jack | J9 | — | — | Non-VOOHU |
| 32 | F Power | Power line common mode choke (input EMI) | L3 | Power Line CMC | WHAL-7060A-102T0 | VOOHU |
| 33 | F Power | PoE / DC input ORing diodes | D12 D13 | — | — | Non-VOOHU |
| 34 | F Power | Synchronous buck ×3 (core / DDR / 3.3V) | U12 U13 U14 | — | — | Non-VOOHU |
| 35 | F Power | DC-DC molded inductor ×3 | L4 L5 L6 | Molded Inductors | WHYT0630 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 35 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the full conference camera reference design packagefull package
Includes the BOM, datasheets of the recommended VOOHU parts and position-by-position selection notes. If you need selection advice for your power scheme, PoE power class, HDMI / USB 3.0 port protection or VISCA control ports, describe it in your requirements. We reply within 24 hours on working days.