Samples
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →
Single-port 10/100/1000BASE-T LAN transformer (Ethernet transformer): 24-pin SMD (low profile), 1500 Vrms isolation, not PoE rated. Operating temperature −40 to +85 °C.
Buy Online
When you click Get a Quote or Samples or Add to Inquiry, part number WHSG24301TG is filled in automatically.
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Reach our sales team for pricing and lead time.

We have received your request. Our sales team will contact you within 1 business day.
01Specifications
Values from published data for this part (parameters, FAQ and evaluation report). The datasheet prevails.
02Cross reference
VOOHU WHSG24301TG can replace Pulse Electronics HX5120NL, iNRCORE GBE-5032NL. See the evaluation reports below for details.
Based on VOOHU replacement evaluations. Check both datasheets and validate with samples before switching.
03Applications
The transformer isolates the PHY from the cable and couples the TX and RX differential pairs to the RJ45 jack.
Center-tap biasing on the PHY side depends on the PHY type (voltage-mode or current-mode).
Typical application for reference. Follow the PHY vendor's reference design.
Reference designs by application:Industrial ControlSecurity MonitoringData Communication
04Documents
05Quality
ISO certificates cover VOOHU's management systems. RoHS and REACH test reports cover tested samples of each product family.
06Ordering
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →07Compare
Red marks values that differ from this part; data from the published parameters of each part.
08FAQ
The WHSG24301TG suits Gigabit ports where the component temperature may fall anywhere between -40 °C and +85 °C and board clearance is no more than 2.85 mm. Typical uses are outdoor access points, network boards for vehicles and rail, wide-temperature industrial gateways, and edge equipment in height-restricted enclosures.
The WHSG24301TG is a single-port, non-PoE low-profile 100/1000 BASE-T transformer, so the port has to be powered locally, and the lower temperature is the operating limit of the component rather than a demonstrated cold-start capability for the finished product. Other options are listed in the 100/1000 BASE-T range.
No. The datasheet assigns no DC balance current capability to the centre taps of the WHSG24301TG, so they cannot be used as a supply path. The four centre taps come out on pins 3 and 4, 9 and 10, 15 and 16, and 21 and 22, named TXCT and TDCT, and should be terminated according to the reference design for the target PHY.
The schematic prints no cable-side or chip-side labels, so wiring must follow the pin numbers on the drawing rather than the net-name prefix, which is not consistent from one VOOHU part to the next. Where the port has to deliver power, send us the target wattage, current and temperature range and we will reselect from the 100/1000 BASE-T range.
Take the WHSG24301TG when the range has to reach -40 °C to +85 °C, accepting that maximum height rises from 2.50 mm to 2.85 mm; take the WHSG24301G where 0 °C to +70 °C is enough, since it is both lower and cheaper. The suggested land pattern, lead span and pin-to-net assignment are identical value for value, as is every electrical figure, so no board change is involved.
Two further points affect production: the lead pitch tolerance on the WHSG24301TG is the wider of the two, so use its own figure when assessing placement capability, and its reel quantity differs from the other parts in the same package.
09Support
REQUEST TYPE
An engineer will contact you within 1 business day using the details you provided.
Typical application