Samples
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →Single-port 10/100/1000BASE-T LAN transformer (Ethernet transformer): 24-pin SMD, 1500 Vrms isolation, not PoE rated. Operating temperature −40 to +125 °C.
Buy Online
When you click Get a Quote or Samples or Add to Inquiry, part number WHSG24301GM is filled in automatically.
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Reach our sales team for pricing and lead time.

We have received your request. Our sales team will contact you within 1 business day.
01Specifications
Values from published data for this part (parameters, FAQ and evaluation report). The datasheet prevails.
02Cross reference
VOOHU WHSG24301GM can replace Pulse Electronics HX5120NL. See the evaluation reports below for details.
Based on VOOHU replacement evaluations. Check both datasheets and validate with samples before switching.
03Applications
The transformer isolates the PHY from the cable and couples the TX and RX differential pairs to the RJ45 jack.
Center-tap biasing on the PHY side depends on the PHY type (voltage-mode or current-mode).
Typical application for reference. Follow the PHY vendor's reference design.
Reference designs by application:Industrial ControlSecurity MonitoringData Communication
04Documents
05Quality
ISO certificates cover VOOHU's management systems. RoHS and REACH test reports cover tested samples of each product family.
06Ordering
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →07Compare
Red marks values that differ from this part; data from the published parameters of each part.
08FAQ
Yes – the WHSG24301GM has a +125 °C upper operating limit, a step above the common +85 °C class. That is the component's own temperature boundary rather than an allowable ambient, so cabinet temperature plus the part's self-heating both have to land within it. Measure the component temperature at the highest planned internal temperature and worst airflow.
The part does not support PoE, so the port has to be powered locally. Other options are listed in the 10/100/1000 BASE-T range.
No – the measurement conditions differ, so the two numbers are not directly comparable. The WHSG24301GM OCL is measured at 100 kHz and 0.1 V, while PoE parts in the same family add a DC bias: the WHSG24701D1 states the same 350 μH but with 8 mA of bias.
Bias shifts the core's operating point, so an OCL value quoted without its bias condition carries no comparative meaning. For incoming inspection or supplier comparison, set the fixture to the condition documented for that specific part.
Decide on the low-temperature end: below -40 °C take the WHSG24301JM, and if -40 °C is enough take the WHSG24301GM. The two share an identical package, recommended pad layout, pin-to-net mapping and high-frequency limits, and both reach +125 °C at the top.
They differ at the cold end and in the OCL entry: the WHSG24301GM documents an OCL figure while the current WHSG24301JM datasheet does not list one, so choose the WHSG24301GM where incoming inspection has to judge against OCL. Because the mechanicals are identical, switching between them needs no board change.
09Support
REQUEST TYPE
An engineer will contact you within 1 business day using the details you provided.
Typical application