Aggregation Switch Reference Design
Illustrative design of a rack-mount L2 managed aggregation switch for the transport layer of video surveillance systems: 24 GbE copper ports (8-port PHY integrated in the switch IC + two 8-port GbE PHYs) aggregate the PoE access switches and NVRs of each floor or area, 4 GbE SFP ports connect remote PoE switches or uplink to the surveillance core, an L2 managed switch IC with integrated CPU, an RJ45 console port, and an AC 100–240V power module. This page gives the function, selection notes and available VOOHU parts for all 25 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and part positions; click any position to view selection notes, recommended parts and package. The board is an illustrative arrangement by functional zone (not an actual layout); the 24 GbE copper ports, 4 SFP ports, console port and AC inlet sit on the bottom edge, and the L2 managed switch IC sits in the core zone at the top.
Copper ports 9–24 come from two 8-port GbE PHYs (JL2308-PI, 8 ports each), connected to the SerDes of the L2 managed switch IC over QSGMII; ports 1–8 take MDI directly from the PHY integrated in the switch IC. The 4 differential pairs of each port are isolated by VOOHU quad-port LAN transformers T1–T6 (WHDG72K01TG, 4 ports each) and go to 2×4 stacked RJ45 jacks (no magnetics). Only 1 port and 1 pair are drawn; the rest are identical. Center taps, Bob Smith termination and crystal load capacitors per the PHY datasheet and the actual design.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A GbE copper ×24 | 2×4 stacked RJ45 ×3 (GbE ports 1–24) | J1 J2 J3 | RJ45 Connectors | WH59C34881111101 | VOOHU |
| 02 | A GbE copper ×24 | Gigabit quad-port LAN transformer ×6 | T1 T2 T3 T4 T5 T6 | Gigabit LAN Transformers | WHDG72K01TG | VOOHU |
| 03 | A GbE copper ×24 | 8-port GbE PHY ×2 (QSGMII, ports 9–24) | U1 U2 | Ethernet PHY | JL2308-PI | VOOHU |
| 04 | A GbE copper ×24 | PHY 25MHz reference clock | Y1 | — | — | Non-VOOHU |
| 05 | A GbE copper ×24 | PHY supply filter molded inductor ×2 | L1 L2 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 06 | A GbE copper ×24 | Port LED serial driver | U3 | — | — | Non-VOOHU |
| 07 | B Gigabit SFP port | SFP cage + 20-pin connector ×4 (ports 25–28) | J4 J5 J6 J7 | SFP Cage / SFP Connectors | WHSFP00211W018 | VOOHU |
| 08 | B Gigabit SFP port | SFP supply filter molded inductor ×4 | L3 L4 L5 L6 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 09 | C Console | Console RJ45 | J8 | RJ45 Connectors | WH56A3188C011101 | VOOHU |
| 10 | C Console | Console ESD | D1 | TVS / ESD | WHALD30E2B | VOOHU |
| 11 | C Console | RS-232 transceiver | U4 | — | — | Non-VOOHU |
| 12 | C Console | Reset / factory-default button | SW1 | — | — | Non-VOOHU |
| 13 | D Core | L2 managed switch IC (24 × GE + 4 × SFP, integrated CPU) | U5 | — | — | Non-VOOHU |
| 14 | D Core | DDR memory | U6 | — | — | Non-VOOHU |
| 15 | D Core | Firmware Flash | U7 | — | — | Non-VOOHU |
| 16 | D Core | Switch chip system clock | Y2 | — | — | Non-VOOHU |
| 17 | D Core | Switch IC supply filter molded inductor ×2 | L7 L8 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 18 | E AC power | AC inlet (with fuse holder) | J9 | — | — | Non-VOOHU |
| 19 | E AC power | AC-DC power module (→ 12V) | PS1 | — | — | Non-VOOHU |
| 20 | E AC power | 12V input TVS | D2 | — | — | Non-VOOHU |
| 21 | E AC power | Power line common-mode choke (EMI) | L9 | Power Line CMC | WHAL-9070A-301T0 | VOOHU |
| 22 | E AC power | Switch IC core buck | U8 | — | — | Non-VOOHU |
| 23 | E AC power | Core buck molded inductor | L10 | Molded Inductors | WHYT1030 Series | VOOHU |
| 24 | E AC power | Multi-channel synchronous buck (3.3V / PHY / DDR) | U9 | — | — | Non-VOOHU |
| 25 | E AC power | Multi-channel buck molded inductor ×2 | L11 L12 | Molded Inductors | WHYTA0530 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 25 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the Aggregation Switch Reference Design full package
Includes the BOM, datasheets for the recommended VOOHU parts and position-by-position selection notes. For selection advice on your port count, number of optical ports or power supply, describe it in your requirements. We reply within 24 hours on business days.