Fiber Media Converter Reference Design
Illustrative design of a Gigabit 1-fiber + 4-copper media converter (compact unmanaged switch form factor) for long-distance fiber backhaul from surveillance sites: one 1000BASE-X SFP port plus four 10/100/1000BASE-T ports, with a JL6107S-PI switch IC (integrated Gigabit PHYs) handling media conversion and switching; powered from a DC 12V adapter or by IEEE 802.3af PoE on port P1, the two sources combined through ORing. This page covers the function, selection notes and VOOHU part numbers for 25 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and BOM positions; click any position for selection notes, recommended parts and package. The board is arranged by functional zone for illustration (not an actual layout); the SFP port, RJ45 1×4 jack and DC power jack sit on the bottom edge; the optical module and enclosure are not drawn.
The 1000BASE-X SerDes of the JL6107S-PI connects directly to TD± / RD± of the SFP 20-pin connector J1; the optical module sits in the VOOHU SFP cage and links over fiber to the remote converter or monitoring-center switch. The module 3.3V supply is filtered by VOOHU molded inductors L1 / L2 (WHYTA0420 series) before VccT / VccR. AC coupling, filter capacitors and the MOD_ABS / LOS / I²C management lines follow SFF-8431 MSA and the module datasheet.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A Fiber Port | SFP cage + 20pin host connector | J1 | SFP Cage / SFP Connectors | WHSFP00211W018 | VOOHU |
| 02 | A Fiber Port | SFP supply filter molded inductor ×2 | L1 L2 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 03 | B Copper P1–P4 | RJ45 1×4 ports (P1–P4) | J2 | RJ45 Connectors | SYT561488AB1A3DY1027 | VOOHU |
| 04 | B Copper P1–P4 | Bob-Smith termination (RC network) | RN1 | — | — | Non-VOOHU |
| 05 | B Copper P1–P4 | GDT (termination common node to chassis) | G1 | GDT | WHGD090V1P0B | VOOHU |
| 06 | B Copper P1–P4 | Gigabit PoE LAN transformer (P1 powered port) | T1 | Gigabit LAN Transformers | WHSG24701D1 | VOOHU |
| 07 | B Copper P1–P4 | Gigabit LAN transformer ×3 (P2–P4) | T2 T3 T4 | Gigabit LAN Transformers | WHSG24701TG | VOOHU |
| 08 | B Copper P1–P4 | Ethernet ESD array ×8 | D1 D2 D3 D4 D5 D6 D7 D8 | TVS / ESD | WHALD03G4U | VOOHU |
| 09 | C PoE PD | PoE input bridge rectifier | D9 | — | — | Non-VOOHU |
| 10 | C PoE PD | PD input TVS | D10 | TVS / ESD | WHTB058VA | VOOHU |
| 11 | C PoE PD | PoE PD controller + flyback PWM | U2 | — | — | Non-VOOHU |
| 12 | C PoE PD | PoE flyback transformer | T5 | PoE Power Transformers | ST1001WH | VOOHU |
| 13 | C PoE PD | Sec. rect. | U3 | — | — | Non-VOOHU |
| 14 | C PoE PD | Opto feedback | U4 | — | — | Non-VOOHU |
| 15 | D Switch Core | Gigabit switch IC (5+2 ports) | U1 | Ethernet Switch ICs | JL6107S-PI | VOOHU |
| 16 | D Switch Core | Switch IC reference crystal | Y1 | — | — | Non-VOOHU |
| 17 | D Switch Core | Switch IC supply filter molded inductor ×2 | L3 L4 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 18 | D Switch Core | Power-on reset | U5 | — | — | Non-VOOHU |
| 19 | E Power | DC 12V power jack | J3 | — | — | Non-VOOHU |
| 20 | E Power | Input fuse | F1 | — | — | Non-VOOHU |
| 21 | E Power | DC input TVS | D11 | — | — | Non-VOOHU |
| 22 | E Power | DC / PoE dual-source ORing diodes ×2 | D12 D13 | — | — | Non-VOOHU |
| 23 | E Power | Power line common-mode choke (EMI) | L5 | Power Line CMC | WHAL-7060A-102T0 | VOOHU |
| 24 | E Power | Synchronous buck ×2 (12V→3.3V→1.1V) | U6 U7 | — | — | Non-VOOHU |
| 25 | E Power | DC-DC molded inductor ×2 | L6 L7 | Molded Inductors | WHYTA0530 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 25 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the Fiber Media Converter Reference Design Full Packagefull package
Includes the BOM, datasheets of the recommended VOOHU parts and per-position selection notes. If you need advice for your fiber / copper port count, power option (DC / PoE PD) or outdoor protection requirements, describe them in your request. We reply within 24 hours on working days.