8-Channel PoE NVR Mainboard Reference Design
Illustrative design of an 8-channel PoE NVR (network video recorder) mainboard for small and mid-size video surveillance projects, at the storage / processing layer: DC 48V input; 8 Gigabit PoE ports (PSE controller + JL6110-PI switch IC with built-in PHYs + 2 × 4 stacked RJ45 + discrete Gigabit PoE LAN transformers) powering IP cameras directly; 1 Gigabit uplink port (JL2101C Gigabit PHY); SATA HDD interface; HDMI / VGA display outputs; USB 2.0; alarm input / output, RS-485 PTZ control and audio input / output; on-board bucks generate 12V (HDD), 5V and core rails. This page covers the function, selection notes and available VOOHU parts for 33 component positions.
Illustrative PCB ⇄ Schematic
The illustrative layout shows placement and component positions; click any position to see its selection notes, recommended parts and package. The board view is an illustration neatly arranged by functional zone (not the actual layout); the PoE ports, uplink port, HDMI, VGA, USB, alarm / RS-485 terminal, audio jacks and DC 48V power jack sit along the bottom edge, and the HDD, IP cameras and monitor are external nodes.
The 8 PoE ports are identical; only 1 port and 1 differential pair are drawn (Gigabit has 4 pairs per port, A/B/C/D identical). The JL6110-PI has built-in Gigabit PHYs whose pairs connect directly to VOOHU Gigabit PoE LAN transformers T1–T8 (WHSG24706-1PTG, PoE+ ≤ 720 mA, one per port); the cable side exits through the RJ45 2×4 stacked jack J1 (no magnetics). The cable-side center taps connect to the PSE output, which delivers 48V to the IP camera (see the PoE supply chain). PHY-side center-tap connection and termination values per the JL6110 datasheet.
Board bill of materials
Click any row to jump to that position and view its selection notes
| No. | Zone | Position | Ref. | VOOHU category | Recommended part | Availability |
|---|---|---|---|---|---|---|
| 01 | A PoE ports P1–P8 | RJ45 2×4 stacked ports (PoE P1–P8) | J1 | RJ45 Connectors | WH59C34881111101 | VOOHU |
| 02 | A PoE ports P1–P8 | Gigabit PoE LAN transformer ×8 | T1 T2 T3 T4 T5 T6 T7 T8 | Gigabit LAN Transformers | WHSG24706-1PTG | VOOHU |
| 03 | B Uplink · Display · USB | Uplink RJ45 port (Gigabit) | J2 | RJ45 Connectors | SYT561188AB1A1DB4 | VOOHU |
| 04 | B Uplink · Display · USB | Uplink Gigabit LAN transformer | T9 | Gigabit LAN Transformers | WHSG24301GM | VOOHU |
| 05 | B Uplink · Display · USB | Uplink Ethernet ESD array ×2 | D1 D2 | TVS / ESD | WHALD03G4U | VOOHU |
| 06 | B Uplink · Display · USB | Uplink Gigabit PHY (RGMII) | U1 | Ethernet PHY | JL2101C-NI | VOOHU |
| 07 | B Uplink · Display · USB | HDMI receptacle | J3 | — | — | Non-VOOHU |
| 08 | B Uplink · Display · USB | HDMI ESD arrays ×2 | D3 D4 | TVS / ESD | WHALD03G4U | VOOHU |
| 09 | B Uplink · Display · USB | VGA port (HD D-SUB 15-pin female) | J4 | D-SUB Connectors | WHB04015611ADF4 | VOOHU |
| 10 | B Uplink · Display · USB | USB 2.0 Type-A receptacle (dual stack) | J5 | USB / Type-C | WH127272040004H4G | VOOHU |
| 11 | B Uplink · Display · USB | USB ESD array ×2 | D5 D6 | TVS / ESD | WHTA5V01P2C | VOOHU |
| 12 | C Alarm · RS-485 · Audio | Alarm / RS-485 terminal | J6 | — | — | Non-VOOHU |
| 13 | C Alarm · RS-485 · Audio | RS-485 bus ESD | D7 | TVS / ESD | WHALD30E2B | VOOHU |
| 14 | C Alarm · RS-485 · Audio | RS-485 bus common-mode choke | L1 | Signal Line CMC | WHAC-4532A-601ZP0 | VOOHU |
| 15 | C Alarm · RS-485 · Audio | RS-485 transceiver | U2 | — | — | Non-VOOHU |
| 16 | C Alarm · RS-485 · Audio | Alarm input optocoupler / alarm output relay | U3 K1 | — | — | Non-VOOHU |
| 17 | C Alarm · RS-485 · Audio | Audio in / out jacks (RCA ×2) | J7 | — | — | Non-VOOHU |
| 18 | C Alarm · RS-485 · Audio | Audio isolation transformer ×2 | T10 T11 | Audio Transformer | WHTT4001 | VOOHU |
| 19 | D Processing · Switching | 8+2-port Gigabit switch IC | U4 | Ethernet Switch ICs | JL6110-PI | VOOHU |
| 20 | D Processing · Switching | Switch IC reference crystal | Y1 | — | — | Non-VOOHU |
| 21 | D Processing · Switching | Switch IC supply filter molded inductor | L2 | Molded Inductors | WHYTA0420 Series | VOOHU |
| 22 | D Processing · Switching | NVR SoC (video decoding / storage processing) | U5 | — | — | Non-VOOHU |
| 23 | D Processing · Switching | SoC crystal | Y2 | — | — | Non-VOOHU |
| 24 | D Processing · Switching | DDR4 memory ×2 | U6 U7 | — | — | Non-VOOHU |
| 25 | D Processing · Switching | eMMC storage | U8 | — | — | Non-VOOHU |
| 26 | D Processing · Switching | SATA HDD interface (data + power) | J8 | — | — | Non-VOOHU |
| 27 | E PoE supply · Power | DC 48V power jack | J9 | — | — | Non-VOOHU |
| 28 | E PoE supply · Power | Input TVS | D8 | TVS / ESD | WHTB058VA | VOOHU |
| 29 | E PoE supply · Power | Power line common-mode choke (EMI) | L3 | Power Line CMC | WHAL-9070A-301T0 | VOOHU |
| 30 | E PoE supply · Power | PSE controller (8-port, with power MOSFETs) | U9 | — | — | Non-VOOHU |
| 31 | E PoE supply · Power | PoE port TVS ×8 | D9 D10 D11 D12 D13 D14 D15 D16 | TVS / ESD | WHTB058VA | VOOHU |
| 32 | E PoE supply · Power | Synchronous buck ×3 (48V→12V→5V→core) | U10 U11 U12 | — | — | Non-VOOHU |
| 33 | E PoE supply · Power | DC-DC molded inductor ×3 | L4 L5 L6 | Molded Inductors | WHYT1030 Series | VOOHU |
Resources & downloads
Board bill of materials
Reference designators, zones, VOOHU categories, recommended parts and availability for all 33 positions. Opens directly in Excel.
Datasheet collection
Datasheet PDFs for the VOOHU parts recommended on this board.
Design files & footprint library
Schematic, PCB, and VOOHU part footprints and 3D models.
Coming soonRequest the NVR reference design full package
Includes the BOM, datasheets for the recommended VOOHU parts and position-by-position selection notes. For selection advice tailored to your PoE channel count, per-port power or uplink / protection requirements, please include it in your requirements. We reply within 24 hours on working days.