Samples
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or SamplesSingle-port 10/100BASE-TX LAN transformer (Ethernet transformer): 16-pin SMD, 2500 Vrms isolation, not PoE rated. Operating temperature 0 to +70 °C.
Buy Online
When you click Get a Quote or Samples or Add to Inquiry, part number WHS16037-2KG is filled in automatically.
Leave your details and we will send a tailored volume quote.
Leave a phone number or an email. Either one is enough.
Our sales team will contact you within 1 business day.
Reach our sales team for pricing and lead time.

We have received your request. Our sales team will contact you within 1 business day.
01Specifications
Values from published data for this part (parameters, FAQ and evaluation report). The datasheet prevails.
02Applications
The transformer isolates the PHY from the cable and couples the TX and RX differential pairs to the RJ45 jack.
Center-tap biasing on the PHY side depends on the PHY type (voltage-mode or current-mode).
Typical application for reference. Follow the PHY vendor's reference design.
Reference designs by application:Industrial ControlSecurity MonitoringData Communication
03Documents
04Quality
ISO certificates cover VOOHU's management systems. RoHS and REACH test reports cover tested samples of each product family.
05Ordering
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples06Compare
Red marks values that differ from this part; data from the published parameters of each part.
07FAQ
The suffix marks the isolation grade: the WHS16037-2KG is rated 2500 VAC where the standard parts on its land pattern are rated 1500 VAC.
The test conditions differ as well: 1 mA for 2 s here against 1 mA for 60 s there. Everything else — inductance, DC resistance, turns ratio, insertion and return loss, cross talk, common-mode rejection, outline and land pattern — matches the standard part. Where the safety documentation calls for the higher short-duration figure, this part fits without a board change.
Neither is simply stricter — the two are different test conditions and cannot be compared on voltage alone.
The WHS16037-2KG is tested at 2500 VAC for 2 s, the standard parts at 1500 VAC for 60 s — 1000 V higher, but applied for a thirtieth of the time. Which one to choose follows from how the system's safety documentation is written: a short-duration high-voltage clause points to the WHS16037-2KG, a longer mid-voltage clause to the standard part. Above 1500 VAC the product line also lists 2500, 3000, 4000, 4800 and 5000 VAC grades, each with its own dwell time.
On ø330 mm tape and reel, 600 pieces per reel, three reels to an inner carton for 1800 pieces and two inner cartons to an export carton for 3600.
The WHS16037-2KG is surface-mount and reflow-assembled, with coplanarity held to 0.10 mm across 16 terminations. The standard part and the wide-temperature part on the same land pattern ship the same quantities, so reel count cannot be used to tell the three apart — incoming checks have to go by the marking on the body.
08Support
REQUEST TYPE
An engineer will contact you within 1 business day using the details you provided.
Urgent, or have drawings or a BOM to share?
WhatsApp +86 133 5804 1040Email voohu@voohuele.com
While you wait:Find a ReplacementDownload Center
Typical application