Samples
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →Single-port 10/100/1000BASE-T LAN transformer (Ethernet transformer): 24-pin SMD, 1500 Vrms isolation, not PoE rated. Operating temperature −40 to +85 °C.
Buy Online
When you click Get a Quote or Samples or Add to Inquiry, part number WHSG24F01ATG is filled in automatically.
Leave your details and we will send a tailored volume quote.
Our sales team will contact you within 1 business day.
Reach our sales team for pricing and lead time.

We have received your request. Our sales team will contact you within 1 business day.
01Specifications
Values from published data for this part (parameters, FAQ and evaluation report). The datasheet prevails.
02Cross reference
VOOHU WHSG24F01ATG can replace Pulse Electronics H5008NL. See the evaluation reports below for details.
Based on VOOHU replacement evaluations. Check both datasheets and validate with samples before switching.
03Applications
The transformer isolates the PHY from the cable and couples the TX and RX differential pairs to the RJ45 jack.
Center-tap biasing on the PHY side depends on the PHY type (voltage-mode or current-mode).
Typical application for reference. Follow the PHY vendor's reference design.
Reference designs by application:Industrial ControlSecurity MonitoringData Communication
04Documents
05Quality
ISO certificates cover VOOHU's management systems. RoHS and REACH test reports cover tested samples of each product family.
06Ordering
Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.
Get a Quote or Samples →07Compare
Red marks values that differ from this part; data from the published parameters of each part.
08FAQ
The datasheet carries no PoE current item, so the WHSG24F01ATG should not be selected as a PoE part and its port has to be powered locally.
A design needing power over the cable has to change part at selection time — the centre taps carry no DC current rating, and no amount of circuit rework adds the capability afterwards. Among the 24-pin single-port surface-mount parts, one prints both 360 mA per channel and 720 mA full channels, which removes the guesswork from a port power budget.
The temperature grade: the WHSG24F01ATG is rated -40 °C to +85 °C, the WHSG24015G 0 °C to +70 °C.
Inductance, DC resistance, turns ratio, insertion and return loss, cross talk, common-mode rejection and isolation match value for value, and neither carries PoE. Choose the WHSG24F01ATG where the equipment powers up below 0 °C or runs above +70 °C for long stretches; in a temperature-controlled indoor setting either will do.
On tape and reel, 500 pieces per ø330 mm reel; two reels to an inner carton for 1000 pieces, and five inner cartons to an export carton for 5000 pieces.
The WHSG24F01ATG is a surface-mount part assembled by reflow. Reel counts are not uniform across packages in the 100/1000 BASE-T range — another 24-pin single-port part ships 800 pieces to a reel — so plan production and material against this part's own figure.
09Support
REQUEST TYPE
An engineer will contact you within 1 business day using the details you provided.
Typical application