Skip to main content

RJ45 Integrated Magnetics Connector: VOOHU SYT111B002FA2A1D as a Replacement for Pulse JX0011D21BNL — Comparison Report

VOOHU Technical Team ·Published ·3 min read
Alternative part See report
Your part · Pulse Electronics JX0011D21BNL
VOOHU alternative SYT111B002FA2A1D10/100M 1*1 90° non-PoE G/Y RJ45 Connector
ParameterPulse JX0011D21BNLVOOHU SYT111B002FA2A1D
Turns Ratio1CT:1 (TX/RX)1CT:1CT ±2% (TX/RX)
Hipot (Isolation)1500 Vrms1500 VAC / 2250 VDC (6s,1mA)
Insertion Loss-1 dB (Typ)-1.0 dB Max (1–100MHz)
Return Loss-20/-16/-12/-10 dB (Typ)-18/-14/-10 dB (Min)

Compiled from both manufacturers' published datasheets. Verify with samples and the PCB footprint before production.

The VOOHU SYT111B002FA2A1D is a replacement candidate for the Pulse (a YAGEO company) JX0011D21BNL: both are industrial -40 to +85°C 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with compatible pinout and mounting.

#1. Competitor Product Overview (Pulse Electronics, a YAGEO company)

The Pulse JX0011D21BNL is an industrial extended-temperature PulseJack from Pulse — a 100BASE-TX 1×1 Tab-Down RJ45 integrated connector module (ICM) with magnetics, 8-pin, with EMI shielding fingers (enhanced EMI, AutoMDIX / Non-AutoMDIX option) and green/yellow (G/Y) LEDs. It meets IEEE 802.3 across the full -40 to +85°C range, peak solder temperature 260°C, with an industry-standard RJ-45 pinout compatible with existing PulseJacks.

#2. VOOHU Replacement Overview (Suzhou VOOHU Electronic Technology Co., Ltd.)

The VOOHU SYT111B002FA2A1D is a 100BASE 1×1 Tab-Down RJ45 integrated magnetics connector with 8 signal pins and dual-color (green/yellow) LEDs, built for an industrial -40 to +85°C range; its pin definition and mounting are compatible with the JX0011D21BNL.

#3. Key Parameter Comparison

The table below uses the Pulse JX0011D21BNL datasheet parameters as the baseline, with the corresponding VOOHU SYT111B002FA2A1D specs filled in (only parameters specified by both and matchable one-to-one are listed).

ParameterPulse JX0011D21BNLVOOHU SYT111B002FA2A1D
Product Name (P/N)JX0011D21BNLSYT111B002FA2A1D
Description100Base-TX 1×1 Tab-Down RJ45 ICM (industrial ext-temp, EMI fingers, LEDs)100Base 1×1 Tab-Down RJ45 ICM (industrial, LEDs)
Turns Ratio1CT:1 (TX/RX)1CT:1CT ±2% (TX/RX)
Insertion Loss-1 dB (Typ)-1.0 dB Max (1–100MHz)
Return Loss-20/-16/-12/-10 dB (Typ)-18/-14/-10 dB (Min)
Crosstalk-40/-35/-30 dB (Typ)-40/-35/-30 dB (Min)
CMR-30/-20 dB (Typ)-30 dB Min (1–100MHz)
Hipot (Isolation)1500 Vrms1500 VAC / 2250 VDC (6s,1mA)
Operating Temp.-40°C to +85°C-40°C to +85°C
Mating Force5 lbs (≈22.2 N) Max23 N Max
Durability750 cycles750 cycles (Min)
Wave Solder Temp.260°C260±5°C (5s Max)
LEDsGreen 565nm / Yellow 585nmGreen 568nm / Yellow 585nm
Pin Count88 (+LED 9–12)
MountingTab-Down (THT)Tab-Down (THT)
ComplianceRoHSREACH & RoHS

Notes:

  1. 1.Both are 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with 8 signal pins and dual-color LEDs; pin definition and mounting are compatible (Pulse uses an industry-standard RJ-45 pinout). Verify the PCB footprint and panel cutout against both drawings.
  2. 2.Both operate at -40 to +85°C (industrial wide-temp) — the temperature grade is identical.
  3. 3.Specification basis: Pulse states insertion loss / return loss / crosstalk / CMR as Typ (typical), while VOOHU states them as Min/Max (guaranteed limits).
  4. 4.Isolation is 1500 on both sides (Pulse 1500 Vrms; VOOHU 1500 VAC, plus a guaranteed 2250 VDC). Turns ratio, crosstalk, durability (750 cycles) and wave-solder temperature (260°C) are identical.
  5. 5.The Pulse JX0011D21BNL includes EMI shielding fingers (enhanced EMI); if your design relies on EMI fingers, confirm the shielding/grounding configuration with VOOHU. The Pulse datasheet does not state OCL (VOOHU is 350 µH Min) and storage temperature is stated only by VOOHU, so both are omitted from the table.

#4. Applications

  1. 1.Ethernet switches and routers (including hubs and SOHO devices).
  2. 2.Server / PC LAN-on-Motherboard (LOM) and network interface cards (NIC).
  3. 3.Industrial Ethernet, edge gateways and SCADA: the -40 to +85°C range fits factory environments.
  4. 4.Security & surveillance (IP cameras, NVR/DVR).
  5. 5.Other 100M-Ethernet devices with industrial wide-temperature or EMI requirements.

#5. FAQ

Are VOOHU SYT111B002FA2A1D and Pulse JX0011D21BNL pin-compatible?

Both are 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with 8 signal pins and green/yellow LEDs; pin definition and mounting are compatible (Pulse uses an industry-standard RJ-45 pinout). Confirm the PCB footprint and panel cutout against the drawings, and verify with samples before production.

Are the two products in the same temperature grade?

Yes. Both operate at -40 to +85°C (industrial wide-temp), suitable for industrial Ethernet and environments with large temperature swings.

Are samples available for SYT111B002FA2A1D?

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.

#Why VOOHU?

  • One-stop sourcing: connectors + magnetics + interface chips, full support from selection to small-batch production.
  • Custom solutions: just share your application requirements and budget to get a tailored solution with professional technical support.
  • Fast development: rapid FAE response, efficient sampling, shorter time-to-market.
  • Core qualifications: ISO9001, ISO14001, RoHS, REACH.

For more information, visit VOOHU: China www.voohu.cn | Overseas www.voohuele.com | Technical support: song.lei@voohu.cn

SAMPLES & SUPPORT

Need a quote, samples or selection support?

Part number SYT111B002FA2A1D is filled in for you. Add the quantity and lead time and submit. Our FAE team will be glad to confirm the options for your project.

Before you order: samples, MOQ, lead time and import duties in our ordering guide →

REQUEST TYPE

Choose a Request Type and Fill in the Fields

Part number decided; you need samples, pricing, or lead time

Contact Details

Have attachments? Send datasheets, BOMs, or drawings to voohu@voohu.cn with your name and company, and our engineers will handle them together with this request.
  1. You see a confirmation right after submitting, and the request goes to our engineering queue

  2. Pricing and lead time within 1 business day; items without stock data are marked "To be confirmed"

  3. If information is missing, we list what we need first instead of closing the request

VOOHU Technical TeamVOOHU FAEs and product engineers sharing selection, cross-reference and troubleshooting know-how for communication components. About the team →
RELATED

Related articles

More on RJ45 Jacks, LAN Transformers.

SUBSCRIBE

Subscribe to VOOHU technical articles

Get new articles in your inbox. Unsubscribe at any time.

By subscribing you agree to our Privacy Policy