Skip to main content

RJ45 Integrated Magnetics Connector: VOOHU SYT111B002FA2A1D as a Replacement for Pulse J0011D21BNL — Comparison Report

VOOHU Technical Team ·Published ·4 min read
Alternative part See report
Your part · Pulse Electronics J0011D21BNL
VOOHU alternative SYT111B002FA2A1D10/100M 1*1 90° non-PoE G/Y RJ45 Connector
ParameterPulse J0011D21BNLVOOHU SYT111B002FA2A1D
Turns Ratio1CT:1 (TX/RX)1CT:1CT ±2% (TX/RX)
OCL350 µH Min (8 mA bias)350 µH Min (100kHz/100mV/8mA)
Hipot (Isolation)1500 Vrms / 2250 VDC1500 VAC / 2250 VDC (6s,1mA)
Insertion Loss-1 dB (Typ)-1.0 dB Max (1–100MHz)

Compiled from both manufacturers' published datasheets. Verify with samples and the PCB footprint before production.

The VOOHU SYT111B002FA2A1D is a replacement candidate for the Pulse (a YAGEO company) J0011D21BNL: both are 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with compatible pinout and mounting, swapping the commercial 0 to +70°C part for an industrial -40 to +85°C grade — delivering greater temperature margin.

#1. Competitor Product Overview (Pulse Electronics, a YAGEO company)

The Pulse J0011D21BNL is a standard J0-series PulseJack — a 100BASE-TX 1×1 Tab-Down RJ45 integrated connector module (ICM) with magnetics, 8-pin, with EMI shielding fingers and green/yellow (G/Y) LEDs. It meets IEEE 802.3 100Base-TX with a minimum 350 µH OCL (8 mA bias), 1500 Vrms isolation (2250 VDC Hipot), a commercial 0 to +70°C operating range and 260°C peak wave-solder temperature, using an industry-standard RJ-45 pinout compatible with existing PulseJacks.

#2. VOOHU Replacement Overview (Suzhou VOOHU Electronic Technology Co., Ltd.)

The VOOHU SYT111B002FA2A1D covers a wider temperature range. It is a 100BASE 1×1 Tab-Down RJ45 integrated magnetics connector with 8 signal pins and dual-color (green/yellow) LEDs, built for an industrial -40 to +85°C range; its pin definition and mounting are compatible with the J0011D21BNL, with greater temperature margin than the commercial-grade original.

#3. Key Parameter Comparison

The table below uses the Pulse J0011D21BNL datasheet parameters as the baseline, with the corresponding VOOHU SYT111B002FA2A1D specs filled in (only parameters specified by both and matchable one-to-one are listed).

ParameterPulse J0011D21BNLVOOHU SYT111B002FA2A1D
Product Name (P/N)J0011D21BNLSYT111B002FA2A1D
Description100Base-TX 1×1 Tab-Down RJ45 ICM (commercial temp, EMI fingers, LEDs)100Base 1×1 Tab-Down RJ45 ICM (industrial, LEDs)
Turns Ratio1CT:1 (TX/RX)1CT:1CT ±2% (TX/RX)
OCL350 µH Min (8 mA bias)350 µH Min (100kHz/100mV/8mA)
Insertion Loss-1 dB (Typ)-1.0 dB Max (1–100MHz)
Return Loss-20/-16/-12/-10 dB (Typ)-18/-14/-10 dB (Min)
Crosstalk-40/-35/-30 dB (Typ)-40/-35/-30 dB (Min)
CMR-30/-20 dB (Typ)-30 dB Min (1–100MHz)
Hipot (Isolation)1500 Vrms / 2250 VDC1500 VAC / 2250 VDC (6s,1mA)
Operating Temp.0°C to +70°C (commercial)-40°C to +85°C (industrial)
Mating Force5 lbs (≈22.2 N) Max23 N Max
Durability750 cycles750 cycles (Min)
Wave Solder Temp.260°C260±5°C (5s Max)
LEDsGreen 565nm / Yellow 585nmGreen 568nm / Yellow 585nm
Pin Count88 (+LED 9–12)
MountingTab-Down (THT)Tab-Down (THT)
ComplianceRoHSREACH & RoHS

Notes:

  1. 1.Both are 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with 8 signal pins and dual-color LEDs; pin definition and mounting are compatible (Pulse uses an industry-standard RJ-45 pinout). Verify the PCB footprint and panel cutout against both drawings.
  2. 2.Operating-temperature difference (key): the Pulse J0011D21BNL is commercial-grade 0 to +70°C, while VOOHU is industrial-grade -40 to +85°C. VOOHU fully covers the commercial range and extends it on both ends, making it better suited to industrial, outdoor and wide-swing thermal environments — replacing the Pulse part gives extra temperature margin.
  3. 3.Specification basis: Pulse states insertion loss / return loss / crosstalk / CMR as Typ (typical), while VOOHU states them as Min/Max (guaranteed limits). Crosstalk matches exactly on both bands and limits (-40/-35/-30 dB @ 1–30/30–60/60–100MHz); return loss and CMR use different frequency bands (see table) and should not be compared point-by-point.
  4. 4.Matching items: OCL (350 µH Min @ 8 mA), turns ratio (1CT:1), isolation (1500 V AC and 2250 V DC), durability (750 cycles), wave-solder temperature (260°C) and LED configuration are identical or equivalent on both sides.
  5. 5.The Pulse J0011D21BNL includes EMI shielding fingers; if your design relies on EMI fingers, confirm the shielding/grounding configuration with VOOHU. Single-side items such as storage temperature (only VOOHU specifies -40 to +85°C) and MSL are omitted from the table.

#4. Applications

  1. 1.Ethernet switches and routers (including hubs and SOHO devices).
  2. 2.Server / PC LAN-on-Motherboard (LOM) and network interface cards (NIC).
  3. 3.Industrial Ethernet, edge gateways and SCADA: the -40 to +85°C range fits harsh factory environments and improves reliability over commercial-temp-only parts.
  4. 4.Security & surveillance (IP cameras, NVR/DVR) and outdoor networking equipment.
  5. 5.Other 100M-Ethernet devices, especially those with industrial wide-temperature or EMI requirements.

#5. FAQ

Are VOOHU SYT111B002FA2A1D and Pulse J0011D21BNL pin-compatible?

Both are 1×1 Tab-Down 100Base RJ45 integrated magnetics connectors with 8 signal pins and green/yellow LEDs; pin definition and mounting are compatible (Pulse uses an industry-standard RJ-45 pinout). Confirm the PCB footprint and panel cutout against the drawings, and verify with samples before production.

Are the two products in the same temperature grade?

VOOHU is wider. The Pulse J0011D21BNL is commercial-grade 0 to +70°C, while VOOHU is industrial-grade -40 to +85°C — it fully covers the commercial range and extends both ends, suiting industrial Ethernet and environments with large temperature swings, giving you more temperature margin.

Are samples available for SYT111B002FA2A1D?

Samples are available for evaluation, and selected parts are free of charge. Our FAE team will be glad to confirm the options for your project.

#Why VOOHU?

  • One-stop sourcing: connectors + magnetics + interface chips, full support from selection to small-batch production.
  • Custom solutions: just share your application requirements and budget to get a tailored solution with professional technical support.
  • Fast development: rapid FAE response, efficient sampling, shorter time-to-market.
  • Core qualifications: ISO9001, ISO14001, RoHS, REACH.

For more information, visit VOOHU: China www.voohu.cn | Overseas www.voohuele.com | Technical support: song.lei@voohu.cn

SAMPLES & SUPPORT

Need a quote, samples or selection support?

Part number SYT111B002FA2A1D is filled in for you. Add the quantity and lead time and submit. Our FAE team will be glad to confirm the options for your project.

Before you order: samples, MOQ, lead time and import duties in our ordering guide →

REQUEST TYPE

Choose a Request Type and Fill in the Fields

Part number decided; you need samples, pricing, or lead time

Contact Details

Have attachments? Send datasheets, BOMs, or drawings to voohu@voohu.cn with your name and company, and our engineers will handle them together with this request.
  1. You see a confirmation right after submitting, and the request goes to our engineering queue

  2. Pricing and lead time within 1 business day; items without stock data are marked "To be confirmed"

  3. If information is missing, we list what we need first instead of closing the request

VOOHU Technical TeamVOOHU FAEs and product engineers sharing selection, cross-reference and troubleshooting know-how for communication components. About the team →
RELATED

Related articles

More on RJ45 Jacks, LAN Transformers.

SUBSCRIBE

Subscribe to VOOHU technical articles

Get new articles in your inbox. Unsubscribe at any time.

By subscribing you agree to our Privacy Policy